Propiedades
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 6 % Show Supplier Material materials with Elongación of 6 % | ASTM D 638 | yld, Type I, 50 mm/min |
Módulo de flexión | 23.0 °C | 2.9 GPa Show Supplier Material materials with Módulo de flexión of 2.9 GPa | ASTM D 790 | 2.6 mm/min, 100 mm span |
Módulo elástico | 23.0 °C | 3 GPa Show Supplier Material materials with Módulo elástico of 3 GPa | ASTM D 638 | 50 mm/min |
Resistencia a la flexión | 23.0 °C | 144 MPa Show Supplier Material materials with Resistencia a la flexión of 144 MPa | ASTM D 790 | yld, 1.3 mm/min, 50 mm span |
Resistencia a la tracción | 23.0 °C | 73 MPa Show Supplier Material materials with Resistencia a la tracción of 73 MPa | ASTM D 638 | brk, Type I, 50 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 32 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 32 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
| Property | Value | Comment |
|---|---|---|
Heat deflection temperature, 0.45 MPa | 160 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 160 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 151 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 151 °C | ASTM D 648 | 6.4 mm, unannealed |
Temperatura de flexión bajo carga | 151 - 160 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 151 - 160 °C | |
Temperatura de reblandecimiento Vicat | 173 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 173 °C | ASTM D 1525 | Rate B/50 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Bottles, Audio, Additive Semiconductor Materials, Food Container, Electronic Components | |
| Availability | Europe,Asia,Americas | |
| Processing methods | Melt Temperature: 265 to 275.0°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |