General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad relativa | 23.0 °C | 1.2 [-] Show Supplier Material materials with Densidad relativa of 1.2 [-] | ASTM D 792 | |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 2.4 % Show Supplier Material materials with Elongación of 2.4 % | ASTM D 638 | brk, Type I, 5 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 101 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 101 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 512 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 512 J/m | ASTM D 4812 | 23°C |
Instrumented Impact, Total Energy | 23.0 °C | 16 J Show Supplier Material materials with Instrumented Impact, Total Energy of 16 J | ASTM D 3763 | 23°C |
Módulo de flexión | 23.0 °C | 5.7 GPa Show Supplier Material materials with Módulo de flexión of 5.7 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span |
Módulo elástico | 23.0 °C | 6.3 GPa Show Supplier Material materials with Módulo elástico of 6.3 GPa | ASTM D 638 | 5 mm/min |
Resistencia a la flexión | 23.0 °C | 170 MPa Show Supplier Material materials with Resistencia a la flexión of 170 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Resistencia a la tracción | 23.0 °C | 108 MPa Show Supplier Material materials with Resistencia a la tracción of 108 MPa | ASTM D 638 | brk, Type I, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 101 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 101 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 0.45 MPa | 164 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 164 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 158 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 158 °C | ASTM D 648 | 3.2mm, unannealed |
Temperatura de flexión bajo carga | 158 - 164 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 158 - 164 °C | |
Temperatura de reblandecimiento Vicat | 175 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 175 °C | ASTM D 1525 | Rate B/50 |
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Rigidez dieléctrica | 23.0 °C | 33.9 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 33.9 kV/mm | ASTM D 149 | in oil, 1.6 mm |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Contracción | 23.0 °C | 0.1 % Show Supplier Material materials with Contracción of 0.1 % | SABIC method | 3.2 mm |
Contracción transversal | 23.0 °C | 0.2 % Show Supplier Material materials with Contracción transversal of 0.2 % | SABIC method | 3.2 mm |
Velocidad de flujo de la masa derretida | 12.8 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 12.8 g/10min | ASTM D 1238 | 300°C/5.0 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Engine Component, EV/HEV Invertor/Convertor, Auto Aftermarket, Sensor, Ignition System | |
Availability | Americas | |
Processing methods | Rear - Zone 1 Temperature: 265 to 315.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |