LEXAN™ Copolymer HFD1262 - Asia

Want to keep this datasheet? Save it now in your required format

Description

19 MFR LEXAN High Flow Ductile Copolymerwith 400 nm cut off, available in transparent colors only

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Ophthalmics

Defensa

Bienes de consumo

Equipamiento e instalaciones deportivas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.3 % Show Supplier Material materials with Absorción de agua of 0.3 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.2 g/cm³ Show Supplier Material materials with Densidad of 1.2 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.2 [-] Show Supplier Material materials with Densidad relativa of 1.2 [-]	ASTM D 792
Moisture absorption	23.0 °C	0.15 % Show Supplier Material materials with Moisture absorption of 0.15 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6 % Show Supplier Material materials with Elongación of 6 %	ISO 527 \| yield, 50 mm/min
Hardness, Rockwell R	23.0 °C	120 [-] Show Supplier Material materials with Hardness, Rockwell R of 120 [-]	ASTM D 785
Impact strength, Izod notched, ASTM	23.0 °C	180 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 180 J/m	ASTM D 256 \| notched, -30°C
Módulo de flexión	23.0 °C	2.1 GPa Show Supplier Material materials with Módulo de flexión of 2.1 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.2 GPa Show Supplier Material materials with Módulo elástico of 2.2 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	90 MPa Show Supplier Material materials with Resistencia a la flexión of 90 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	59 MPa Show Supplier Material materials with Resistencia a la tracción of 59 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	11 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 11 kJ/m²	ISO 180/1A \| notched 80103, -30°C
Resistencia al choque, ensayo Charpy no entallado	ISO 179/1eU \| Unnotch Edgew 80103 sp=62mm, 23°C
Resistencia al choque, ensayo Izod no entallado	ISO 180/1U \| 80103, -30°C

Aplicaciones térmicas

Property	Value	Comment
Ball Pressure Test	PASS	IEC 60695-10-2 \| 125°C +/- 2°C
Heat deflection temperature, 0.45 MPa	123 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 123 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa	111 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 111 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga	111 - 123 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 111 - 123 °C
Temperatura de reblandecimiento Vicat	136 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 136 °C	ISO 306 \| Rate B/120

Óptico

Property	Value	Comment
Transmission	88 % Show Supplier Material materials with Transmission of 88 %	ASTM D 1003 \| 2.54 mm
Turbidez	1 % Show Supplier Material materials with Turbidez of 1 %	<, ASTM D 1003 \| 2.54 mm
Índice de refracción	1.58 [-] Show Supplier Material materials with Índice de refracción of 1.58 [-]	ASTM D542

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		19 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 19 g/10min	ASTM D 1238 \| 300°C/1.2 kgf
Velocidad de flujo del volumen derretido		16 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 16 cm³/10min	ISO 1133 \| MVR at 300°C/1.2 kg

Technological properties

Property
Application areas	Safety Glasses, Individual Equiptment, Exercise Equipment
Availability	Europe,Asia,Americas
Processing methods	Back Pressure: 0.3 to 0.7MPa Melt Temperature: 260 to 305.0°C Vent Depth: 0.038 to 0.076mm Middle - Zone 2 Temperature: 250 to 295.0°C Nozzle Temperature: 255 to 300.0°C Drying Time: 3 to 4.0hrs Shot to Cylinder Size: 40 to 60.0% Drying Time (Cumulative): 24hrs Drying Temperature: 105 to 110.0°C Mold Temperature: 50 to 80.0°C Rear - Zone 1 Temperature: 240 to 280.0°C Front - Zone 3 Temperature: 260 to 305.0°C Screw Speed: 35 to 75.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.