LEXAN™ Copolymer FST3403 - Asia

Want to keep this datasheet? Save it now in your required format

Description

LEXAN FST3403 resin is a high flow PC Copolymer Resin, suitable for injection molding. This halogen-free flame retardant resin is EN45545 R6 HL3 compliant and an ideal candidate for train interior applications (category R6). It also meets requirements of DIN5510-2, NFPA-130 and PN-K-02511 standards. Available in opaque colors.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

1.33 g/cm³

Show Supplier Material materials with Densidad of 1.33 g/cm³

ISO 1183

Densidad relativa

23.0 °C

1.33 [-]

Show Supplier Material materials with Densidad relativa of 1.33 [-]

ASTM D 792 |

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

6 %

Show Supplier Material materials with Elongación of 6 %

ISO 527 | yield, 50 mm/min

Impact strength, Izod notched, ASTM

23.0 °C

130 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 130 J/m

ASTM D 256

Instrumented Impact, Total Energy

23.0 °C

80 J

Show Supplier Material materials with Instrumented Impact, Total Energy of 80 J

ASTM D 3763 | 23°C

Módulo de flexión

23.0 °C

2.7 GPa

Show Supplier Material materials with Módulo de flexión of 2.7 GPa

ISO 178 | 2 mm/min

Módulo elástico

23.0 °C

2.6 GPa

Show Supplier Material materials with Módulo elástico of 2.6 GPa

ISO 527 | 1 mm/min

Resistencia a la flexión

23.0 °C

110 MPa

Show Supplier Material materials with Resistencia a la flexión of 110 MPa

ISO 178 | yield, 2 mm/min

Resistencia a la tracción

23.0 °C

70 MPa

Show Supplier Material materials with Resistencia a la tracción of 70 MPa

ISO 527 | break, 50 mm/min

Resistencia al choque, ensayo Charpy entallado

23.0 °C

13 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²

ISO 179/1eA | V-notch Edgew 80*10*3 sp=62mm, 23°C

Resistencia al choque, ensayo Izod entallado

23.0 °C

13 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 13 kJ/m²

ISO 180/1A | 80*10*3, 23°C

Resistencia al choque, ensayo Charpy no entallado

ISO 179/1eU | Unnotch Edgew 80*10*3 sp=62mm, 23°C

Resistencia al choque, ensayo Izod no entallado

ISO 180/1U | unnotched 80*10*3, -30°C

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

6E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Coeficiente de dilatación térmica transversal

23.0 °C

6E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Heat deflection temperature, 0.45 MPa

105 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 105 °C

ISO 75/Bf | Flatw 80*10*4 sp=64mm

Heat deflection temperature, 1.80 MPa

95 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 95 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Temperatura de flexión bajo carga

95 - 105 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 95 - 105 °C

Temperatura de reblandecimiento Vicat

115 °C

Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 115 °C

ISO 306 | Rate B/120

Inflamabilidad

Smoke density, DS-4, 50 kW/m2, 3mm: <150- ISO 5659-2 <br> Heat release, MAHRE, 50 kW/m2, 3 mm: <60kW/m² ISO 5660-1 <br> Smoke density, VOF4, 50 kW/m2, 3mm: <300- ISO 5659-2 <br> Smoke toxicity, CITG (8 min), 50 kW/m2, 3 mm: 0.1- ISO 5659-2 <br> Fire Safety Hazard Level - Requirement set R6: HL3- EN 45545-2:2013

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.5 %

Show Supplier Material materials with Contracción of 0.5 %

SABIC method

Contracción transversal

23.0 °C

0.5 %

Show Supplier Material materials with Contracción transversal of 0.5 %

SABIC method

Velocidad de flujo de la masa derretida

12 g/10min

Show Supplier Material materials with Velocidad de flujo de la masa derretida of 12 g/10min

ASTM D 1238 | 300°C/1.2 kgf

Velocidad de flujo del volumen derretido

10 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 10 cm³/10min

ISO 1133 | MVR at 300°C/1.2 kg

Technological properties

Property
Application areas

Exterior Rail Components, Amusement Machine, Rail Seating, Rail Cabin Interiors, Interior Rail Components, Wireless Communications, Wiring Devices

Availability

Europe,Asia,Americas

Processing methods

Middle - Zone 2 Temperature: 240 to 280.0°C
Vent Depth: 0.025 to 0.076mm
Back Pressure: 0.3 to 0.7MPa
Rear - Zone 1 Temperature: 230 to 260.0°C
Drying Time: 6 to 8.0hrs
Mold Temperature: 50 to 80.0°C
Screw Speed: 40 to 70.0rpm
Drying Temperature: 95 to 100.0°C
Melt Temperature: 250 to 290.0°C
Shot to Cylinder Size: 40 to 60.0%
Nozzle Temperature: 245 to 285.0°C
Front - Zone 3 Temperature: 250 to 290.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.