Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.27 g/cm³ Show Supplier Material materials with Densidad of 1.27 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Elongación | 23.0 °C | 455 % Show Supplier Material materials with Elongación of 455 % | ISO 527 | break, 50 mm/min | ||
Módulo de flexión | 23.0 °C | 0.2 GPa Show Supplier Material materials with Módulo de flexión of 0.2 GPa | ISO 178 | 2 mm/min | ||
Módulo elástico | 23.0 °C | 0.2 GPa Show Supplier Material materials with Módulo elástico of 0.2 GPa | ISO 527 | 1 mm/min | ||
Resistencia a la tracción | 23.0 °C | 24 MPa Show Supplier Material materials with Resistencia a la tracción of 24 MPa | ISO 527 | yield, 50 mm/min | ||
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 21 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 21 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C | ||
Resistencia al choque, ensayo Izod no entallado | ISO 180/1U | 80*10*4, 23°C | ||||
Rheological Properties
Technological properties
| Property | ||
|---|---|---|
| Availability | Europe,Americas | |
| Processing methods | Drying Temperature: 80°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |