LNP™ LUBRICOMP™ Compound PFL38S - Europe

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP PFL38S is a compound based on Nylon 6 resin containing 40% Glass Fiber, 15% PTFE. Added features of this material include: Heat Stabilized, Wear Resistant

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	3.5 % Show Supplier Material materials with Elongación of 3.5 %	ISO 527 \| break, 5 mm/min
Módulo de flexión	23.0 °C	11.6 GPa Show Supplier Material materials with Módulo de flexión of 11.6 GPa	ISO 178 \| 2 mm/min
Resistencia a la flexión	23.0 °C	251 MPa Show Supplier Material materials with Resistencia a la flexión of 251 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	172 MPa Show Supplier Material materials with Resistencia a la tracción of 172 MPa	ISO 527 \| break, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	14 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 14 kJ/m²	ISO 180/1A \| 80104, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	203 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 203 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga	203 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 203 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.1 % Show Supplier Material materials with Contracción of 0.1 %	SABIC method

Technological properties

Property
Availability	Europe,Americas
Processing methods	Melt Temperature: 265 to 275.0°C Front - Zone 3 Temperature: 275 to 290.0°C Rear - Zone 1 Temperature: 250 to 260.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 30 to 60.0rpm Mold Temperature: 80 to 95.0°C Maximum Moisture Content: 0.15 to 0.25% Middle - Zone 2 Temperature: 265 to 275.0°C Drying Time: 4hrs Drying Temperature: 80°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.