ULTEM™ Resin 9085 - Americas

Want to keep this datasheet? Save it now in your required format

Description

High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke and flame evolution.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.39 %

Show Supplier Material materials with Absorción de agua of 0.39 %

ISO 62-1 | (23°C/saturated)

Densidad

23.0 °C

1.34 g/cm³

Show Supplier Material materials with Densidad of 1.34 g/cm³

ISO 1183

Densidad relativa

23.0 °C

1.34 [-]

Show Supplier Material materials with Densidad relativa of 1.34 [-]

ASTM D 792 |

Moisture absorption

23.0 °C

0.17 %

Show Supplier Material materials with Moisture absorption of 0.17 %

ISO 62 | (23°C / 50% RH)

Índice límite de óxigeno

23.0 °C

49 %

Show Supplier Material materials with Índice límite de óxigeno of 49 %

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

50 %

Show Supplier Material materials with Elongación of 50 %

ISO 527 | break, 5 mm/min

Impact strength, Izod notched, ASTM

23.0 °C

115 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 115 J/m

ASTM D 256

Módulo de flexión

23.0 °C

2.8 GPa

Show Supplier Material materials with Módulo de flexión of 2.8 GPa

ISO 178 | 2 mm/min

Módulo elástico

23.0 °C

3.1 GPa

Show Supplier Material materials with Módulo elástico of 3.1 GPa

ISO 527 | 1 mm/min

Resistencia a la flexión

23.0 °C

90 MPa

Show Supplier Material materials with Resistencia a la flexión of 90 MPa

ISO 178 | yield, 2 mm/min

Resistencia a la tracción

23.0 °C

88 MPa

Show Supplier Material materials with Resistencia a la tracción of 88 MPa

ISO 527 | yield, 5 mm/min

Resistencia al choque, ensayo Izod entallado

23.0 °C

13 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 13 kJ/m²

ISO 180/1A | 80*10*4, 23°C

Aplicaciones térmicas

PropertyValueComment

Heat deflection temperature, 1.80 MPa

152 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 152 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Temperatura de flexión bajo carga

152 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 152 °C

Temperatura de reblandecimiento Vicat

173 °C

Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 173 °C

ISO 306 | Rate B/120

Inflamabilidad

FAA Flammability, FAR 25.853 A/B: <5- FAR 25.853 <br> OSU peak heat release rate (5 minute test): 36kW/m² FAR 25.853 <br> Vertical Burn a (60s) passes at: 2sec FAR 25.853

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.5 %

Show Supplier Material materials with Contracción of 0.5 %

SABIC method | 3.2 mm

Velocidad de flujo de la masa derretida

8.9 g/10min

Show Supplier Material materials with Velocidad de flujo de la masa derretida of 8.9 g/10min

ASTM D 1238 | 295°C/6.6 kgf

Velocidad de flujo del volumen derretido

40 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 40 cm³/10min

ISO 1133 | MVR at 340°C/5.0 kg

Technological properties

Property
Application areas

Fused Deposition Modeling (FDM), Electronics, Enclosures, Electronic Components, Air Cabin Interiors, Aircraft Seating, Aerospace, Audio, Displays, Document Handling, Composite, Non-LED Lighting, Photovoltaic Components, Wireless Communications

Availability

Europe,Asia,Americas

Processing methods

Melt Temperature: 330 to 350.0°C
Nozzle Temperature: 330 to 350.0°C
Barrel - Zone 4 Temperature: 295 to 310.0°C
Middle - Zone 2 Temperature: 325 to 345.0°C
Barrel - Zone 2 Temperature: 280 to 295.0°C
Shot to Cylinder Size: 40 to 60.0%
Calibrator 2 Temperature: 80 to 120.0°C
Melt Temperature: 280 to 310.0°C
Rear - Zone 1 Temperature: 315 to 340.0°C
Front - Zone 3 Temperature: 330 to 350.0°C
Adapter Temperature: 270 to 310.0°C
Barrel - Zone 3 Temperature: 290 to 305.0°C
Screw Speed: 40 to 70.0rpm
Maximum Moisture Content: 0.02%
Drying Time: 4 to 6.0hrs
Back Pressure: 0.3 to 0.7MPa
Barrel - Zone 1 Temperature: 265 to 275.0°C
Drying Temperature: 135°C
Maximum Moisture Content: 0.02%
Die Temperature: 260 to 310.0°C
Drying Temperature: 120 to 130.0°C
Calibrator Temperature: 130 to 160.0°C
Vent Depth: 0.025 to 0.076mm
Mold Temperature: 120 to 150.0°C
Drying Time: 4 to 6.0hrs
Hopper Temperature: 80 to 100.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.