ULTEM™ Resin 9075 - Europe

Want to keep this datasheet? Save it now in your required format

Description

High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Fabricación

Fabricación de aditivos

Ferrocarriles

Aeroespacial

Materiales aeroespaciales

Aircraft Interiors

Defensa

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6 % Show Supplier Material materials with Elongación of 6 %	ISO 527 \| yield, 50 mm/min
Módulo de flexión	23.0 °C	3.2 GPa Show Supplier Material materials with Módulo de flexión of 3.2 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	3.2 GPa Show Supplier Material materials with Módulo elástico of 3.2 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	120 MPa Show Supplier Material materials with Resistencia a la flexión of 120 MPa	ISO 178 \| break, 2 mm/min
Resistencia a la tracción	23.0 °C	90 MPa Show Supplier Material materials with Resistencia a la tracción of 90 MPa	ISO 527 \| yield, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 5 kJ/m²	ISO 180/1A \| 80104, -30°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	185 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 185 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga	185 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 185 °C
Inflamabilidad	OSU peak heat release rate (5 minute test): 16kW/m² FAR 25.853 <br> Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> UL Compliant, 94V-0 Flame Class Rating: 1.6mm UL 94 by SABIC-IP

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.6 % Show Supplier Material materials with Contracción of 0.6 %	SABIC method \| on tensile bar

Technological properties

Property
Application areas	Air Cabin Interiors, Aircraft Seating, Aerospace, Defense Vehicles, Infrastructure
Availability	Europe,Asia,Americas
Processing methods	Drying Time: 4 to 6.0hrs Barrel - Zone 1 Temperature: 280 to 300.0°C Barrel - Zone 4 Temperature: 310 to 335.0°C Hopper Temperature: 80 to 120.0°C Calibrator Temperature: 140 to 170.0°C Melt Temperature: 295 to 330.0°C Melt Temperature: 350 to 370.0°C Rear - Zone 1 Temperature: 340 to 360.0°C Drying Temperature: 130 to 140.0°C Barrel - Zone 2 Temperature: 295 to 320.0°C Maximum Moisture Content: 0.02% Front - Zone 3 Temperature: 350 to 370.0°C Hopper Temperature: 80 to 100.0°C Calibrator 2 Temperature: 90 to 130.0°C Maximum Moisture Content: 0.02% Barrel - Zone 3 Temperature: 305 to 330.0°C Mold Temperature: 135 to 165.0°C Middle - Zone 2 Temperature: 345 to 365.0°C Drying Time: 4 to 6.0hrs Nozzle Temperature: 350 to 370.0°C Adapter Temperature: 285 to 335.0°C Die Temperature: 275 to 330.0°C Drying Temperature: 135 to 145.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Shot to Cylinder Size: 40 to 60.0% Vent Depth: 0.025 to 0.076mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.