Norylux Unfilled

Want to keep this datasheet? Save it now in your required format

Description

Norylux modified polyphenylene oxide (PPO) is a high strength amorphous engineering thermoplastic offering outstanding mechanical, thermal, and electrical properties along with low moisture absorption and low thermal expansion. Westlake Plastics extrudes and compression molds unfilled and flame-retardant products and compression molds glass reinforced, and glass/mineral filled products.

Los datos sobre este material han sido proporcionados por Westlake Plastics.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.07 %

Show Supplier Material materials with Absorción de agua of 0.07 %

@24 hours | ASTM D570

Densidad

23.0 °C

1.08 g/cm³

Show Supplier Material materials with Densidad of 1.08 g/cm³

ASTM D792

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

25 %

Show Supplier Material materials with Elongación of 25 %

ASTM D638

Flexural yield strength

23.0 °C

14 MPa

Show Supplier Material materials with Flexural yield strength of 14 MPa

ASTM D790

Hardness, Rockwell R

23.0 °C

119 [-]

Show Supplier Material materials with Hardness, Rockwell R of 119 [-]

ASTM D785

Impact strength, Izod notched, ASTM

-40.0 °C

133 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 133 J/m

ASTM D256

20.0 °C

187 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 187 J/m

ASTM D256

Módulo de flexión

23.0 °C

2.5 GPa

Show Supplier Material materials with Módulo de flexión of 2.5 GPa

ASTM D790

Resistencia a la tracción

23.0 °C

63.4 MPa

Show Supplier Material materials with Resistencia a la tracción of 63.4 MPa

ASTM D638

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

6E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 6E-5 1/K

ASTM E831

Heat deflection temperature, 0.45 MPa

123 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 123 °C

ASTM D648

Inflamabilidad

UL94: V-1 for 1.5mm and V-0 for V-0 for 6mm

Eléctrico

PropertyTemperatureValueComment

Dielectric constant, 60Hz

23.0 °C

2.69 [-]

Show Supplier Material materials with Dielectric constant, 60Hz of 2.69 [-]

ASTM D150

Dissipation factor, 60Hz

23.0 °C

7E-4 [-]

Show Supplier Material materials with Dissipation factor, 60Hz of 7E-4 [-]

ASTM D150

Rigidez dieléctrica

23.0 °C

20 kV/mm

Show Supplier Material materials with Rigidez dieléctrica of 20 kV/mm

ASTM D149

Technological properties

Property
Application areas

  • Manifolds
  • Pump, valve, and fitting applications
  • Scientific and analytical instrument components
  • Housings/Covers
  • Electrical Components