AA Standards Grade 5252 H26

Want to keep this datasheet? Save it now in your required format

Related Standards

Equivalent Materials

This material data has been provided by AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated Standards

Density

2.67 g/cm³

Show Material materials with Density of 2.67 g/cm³

H26

AA Standards, ASTM B209

Mechanical

PropertyTemperatureValueConditionRelated StandardsComment

Elastic modulus

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H26

AA Standards, ASTM B209

Unlock all property charts

Elongation A50

23.0 °C

3 %

Show Material materials with Elongation A50 of 3 %

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Shear modulus

26.0 - 26.5 GPa

Show Material materials with Shear modulus of 26.0 - 26.5 GPa

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Tensile strength

260.0 MPa

Show Material materials with Tensile strength of 260.0 MPa

H26

AA Standards, ASTM B209

Unlock all property charts

Thermal

PropertyTemperatureValueConditionRelated StandardsComment

Coefficient of thermal expansion

100 °C, 20 °C

2.38e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K

H26

AA Standards, ASTM B209

Unlock all property charts

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

605.0 - 650.0 °C

Show Material materials with Melting point of 605.0 - 650.0 °C

H26

AA Standards, ASTM B209

Specific heat capacity

879.0 - 963.0 J/(kg·K)

Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K)

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Thermal conductivity

138 W/(m·K)

Show Material materials with Thermal conductivity of 138 W/(m·K)

H26

AA Standards, ASTM B209

Unlock all property charts

Electrical

PropertyValueConditionRelated Standards

Electrical conductivity

20000000.0 S/m

Show Material materials with Electrical conductivity of 20000000.0 S/m

H26

AA Standards, ASTM B209

Unlock all property charts

Electrical resistivity

5e-08 Ω·m

Show Material materials with Electrical resistivity of 5e-08 Ω·m

H26

AA Standards, ASTM B209

Unlock all property charts

Chemical properties

PropertyValueConditionRelated Standards

Copper

0.1 %

Show Material materials with Copper of 0.1 %

H26

AA Standards, ASTM B209

Iron

0.10 %

Show Material materials with Iron of 0.10 %

H26

AA Standards, ASTM B209

Magnesium

2.2 - 2.8 %

Show Material materials with Magnesium of 2.2 - 2.8 %

H26

AA Standards, ASTM B209

Manganese

0.1 %

Show Material materials with Manganese of 0.1 %

H26

AA Standards, ASTM B209

Other

each 0.03, total 0.10, Rest Al

Silicon

0.08 %

Show Material materials with Silicon of 0.08 %

H26

AA Standards, ASTM B209

Vanadium

0.05 %

Show Material materials with Vanadium of 0.05 %

H26

AA Standards, ASTM B209

Zinc

0.05 %

Show Material materials with Zinc of 0.05 %

H26

AA Standards, ASTM B209

Technological properties

Property
Brazing

general: limited brazing

Corrosion properties

Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere

General machinability

General: poor (H24, H25), sufficient (H28)

Workability

general (condition): acceptable (H24, H25), poor(H28)