Properties
General
| Property | Value | Temperature |
|---|---|---|
Density | 2.69 - 2.71 g/cm³ Show Material materials with Density of 2.69 - 2.71 g/cm³ at 23.0 °C | 23.0 °C |
Dimension
| Property | Value |
|---|---|
Thickness | 0.2 - 3 mm Show Material materials with Thickness of 0.2 - 3 mm |
Mechanical
| Property | Value | Temperature | Comment |
|---|---|---|---|
Bending angle 180° | 0 - 1 °/t Show Material materials with Bending angle 180° of 0 - 1 °/t at 23.0 °C | 23.0 °C | |
Bending angle 90° | 0 - 1 °/t Show Material materials with Bending angle 90° of 0 - 1 °/t at 23.0 °C | 23.0 °C | |
Elastic modulus | 69 - 70 GPa Show Material materials with Elastic modulus of 69 - 70 GPa at 23.0 °C | 23.0 °C | |
Elongation | 32 % Show Material materials with Elongation of 32 % at 23.0 °C | 23.0 °C | |
Elongation A100 | 32 % Show Material materials with Elongation A100 of 32 % at 23.0 °C | 23.0 °C | |
Elongation A50 | 20 - 35 % Show Material materials with Elongation A50 of 20 - 35 % at 23.0 °C | 23.0 °C | |
Hardness, Brinell | 20 [-] Show Material materials with Hardness, Brinell of 20 [-] at 23.0 °C | 23.0 °C | |
Plane-Strain Fracture Toughnes | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C | 23.0 °C | Typical for Wrought 1000 Series Aluminium |
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 23.0 °C | 23.0 °C | Typical for Wrought 1000 Series Aluminium |
Shear modulus | 26.5 GPa Show Material materials with Shear modulus of 26.5 GPa at 23.0 °C | 23.0 °C | |
Tensile strength | 65 - 105 MPa Show Material materials with Tensile strength of 65 - 105 MPa at 23.0 °C | 23.0 °C | |
Yield strength Rp0.2 | 20 MPa Show Material materials with Yield strength Rp0.2 of 20 MPa at 23.0 °C | 23.0 °C |
Thermal
| Property | Value | Temperature | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 2.36E-5 - 2.38E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 - 2.38E-5 1/K at 20.0 °C | 20.0 °C | 20-100°C |
2.36E-5 - 2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 - 2.4E-5 1/K at 100.0 °C | 100.0 °C | 20-100°C | |
Melting point | 645 - 657 °C Show Material materials with Melting point of 645 - 657 °C | ||
Specific heat capacity | 900 - 963 J/(kg·K) Show Material materials with Specific heat capacity of 900 - 963 J/(kg·K) at 23.0 °C | 23.0 °C | Typical for Wrought 1000 Series Aluminium |
Thermal conductivity | 138 - 235 W/(m·K) Show Material materials with Thermal conductivity of 138 - 235 W/(m·K) at 23.0 °C | 23.0 °C | |
Electrical
| Property | Value | Temperature |
|---|---|---|
Electrical conductivity | 3.54E+7 - 3.65E+7 S/m Show Material materials with Electrical conductivity of 3.54E+7 - 3.65E+7 S/m at 23.0 °C | 23.0 °C |
Electrical resistivity | 2.74E-8 - 4.9E-8 Ω·m Show Material materials with Electrical resistivity of 2.74E-8 - 4.9E-8 Ω·m at 23.0 °C | 23.0 °C |
Chemical properties
| Property | ||
|---|---|---|
Aluminium | 99.5 % | |
Boron | 0.05 % | |
Chromium | 0.01 % | |
Copper | 0.05 % | |
Gallium | 0.03 % | |
Iron | 0.4 % | |
Manganese | 0.01 % | |
Other | 0.1 % | Ti + V < 0.02, each 0.03, total 0.10 |
Silicon | 0.1 % | |
Zinc | 0.05 % |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | Good (For surface protection only) | |
| Application areas | Conductors; rods for the manufacture of aluminium conductor wires. | |
| Brazing | Excellent | |
| Corrosion properties | Very Good | |
| Welding | Very Good | |
| Workability | Very Good | |