Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.8 g/cm³ Show Material materials with Density of 2.8 g/cm³ | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 72.5 GPa Show Material materials with Elastic modulus of 72.5 GPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 2000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 2000 Series Aluminium | |||
Shear modulus | 27.2 GPa Show Material materials with Shear modulus of 27.2 GPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | |
Tensile strength | 200.0 - 260.0 MPa Show Material materials with Tensile strength of 200.0 - 260.0 MPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | |
200.0 - 400.0 MPa Show Material materials with Tensile strength of 200.0 - 400.0 MPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | |
100 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | ||
Melting point | 512.0 - 650.0 °C Show Material materials with Melting point of 512.0 - 650.0 °C | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar | ||
Specific heat capacity | 816.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 816.0 - 963.0 J/(kg·K) | Typical for Wrought 2000 Series Aluminium | ||||
Thermal conductivity | 130.0 - 200.0 W/(m·K) Show Material materials with Thermal conductivity of 130.0 - 200.0 W/(m·K) | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 18000000.0 - 28000000.0 S/m Show Material materials with Electrical conductivity of 18000000.0 - 28000000.0 S/m | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Electrical resistivity | 3.57e-08 - 5.56e-08 Ω·m Show Material materials with Electrical resistivity of 3.57e-08 - 5.56e-08 Ω·m | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 % Show Material materials with Chromium of 0.1 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Copper | 3.5 - 4.5 % Show Material materials with Copper of 3.5 - 4.5 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Iron | 0.70 % Show Material materials with Iron of 0.70 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Magnesium | 0.4 - 1.0 % Show Material materials with Magnesium of 0.4 - 1.0 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Manganese | 0.4 - 1.0 % Show Material materials with Manganese of 0.4 - 1.0 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Silicon | 0.2 - 0.8 % Show Material materials with Silicon of 0.2 - 0.8 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Zinc | 0.25 % Show Material materials with Zinc of 0.25 % | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: not suitable, Protective: good | |
| Brazing | hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable | |
| Corrosion properties | Seawater: poor, weathering: sufficient | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) acceptable (O) / acceptable (O) | |