5505 O Non-Heat Treatable Al Wrought Alloy

Want to keep this datasheet? Save it now in your required format

Description

The EN AW-5505 alloy is used for special applications not covered by a European standard. EU standards do not specify its mechanical characteristics. Mechanical properties to be agreed with the customer. It has excellent corrosion resistance and surface finishing properties. Suitable for electrochemical brightening.

Related Standards

Equivalent Materials

This material data has been provided by Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

23.0 °C

2.69 g/cm³

Show Supplier Material materials with Density of 2.69 g/cm³

Mechanical

PropertyTemperatureValue

Elastic modulus

23.0 °C

68.9 GPa

Show Supplier Material materials with Elastic modulus of 68.9 GPa

Shear modulus

23.0 °C

26.4 GPa

Show Supplier Material materials with Shear modulus of 26.4 GPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

100.0 °C

2.5E-5 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 2.5E-5 1/K

20-100°C

Thermal conductivity

23.0 °C

200 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 200 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical resistivity

23.0 °C

3.3E-8 Ω·m

Show Supplier Material materials with Electrical resistivity of 3.3E-8 Ω·m

Chemical properties

PropertyValue

Iron

0.04 %

Show Supplier Material materials with Iron of 0.04 %

Magnesium

0.8 - 1.1 %

Show Supplier Material materials with Magnesium of 0.8 - 1.1 %

Manganese

0.03 %

Show Supplier Material materials with Manganese of 0.03 %

Other

0.01 %

Show Supplier Material materials with Other of 0.01 %

Silicon

0.06 %

Show Supplier Material materials with Silicon of 0.06 %

Titanium

0.01 %

Show Supplier Material materials with Titanium of 0.01 %

Zinc

0.04 %

Show Supplier Material materials with Zinc of 0.04 %

Technological properties

Property
Anodizing

Excellent

Application areas

Cosmetics: Cosmetics pieces; Automotive trim: Window frame, Marque badges

Brazing

Good

Corrosion properties

Excellent

Welding

Good

Workability

Good