Kynar® ADX 1720-03

Alternative and trade names
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Kynar® ADX 1720-03 resin is a thermoplastic fluorinated functionalized polymer. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. More over, this grade increases the potential of adhesion on materials as polyamides, polyolefins and can be coextruded.

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.78 g/cm³ Show Supplier Material materials with Density of 1.78 g/cm³	dry	ISO 1183

Mechanical

Property	Value	Condition	Testing Standard	Comment
Elongation	50 % Show Supplier Material materials with Elongation of 50 %	dry	ISO 527-1/-2	min. \| nominal
Elongation at yield	8 % Show Supplier Material materials with Elongation at yield of 8 %	dry	ISO 527-1/-2
Yield strength	30 MPa Show Supplier Material materials with Yield strength of 30 MPa	dry	ISO 527-3

Thermal

Property	Value	Condition	Testing Standard	Pressure	Comment
Heat deflection temperature	108 °C Show Supplier Material materials with Heat deflection temperature of 108 °C	dry	ISO 75-1/-2	2 MPa
Melting point	170 °C Show Supplier Material materials with Melting point of 170 °C	dry	ISO 11357-1/-3		10°C/min
Flammability	At thickness 0.8 mm IEC 60695-11-10: HB

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Melt volume-flow rate	15 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 15 cm³/10min	dry	ISO 1133	230°C/3.8kg

Technological properties

Property
Application areas	Underground Fuel Containment

Kynar® ADX 1720-03

Description

Ashby charts

Applications

Materials by this supplier

Properties