The material: 'Polyamide Nylon 6 Film' you were looking for has been superseded by the one below.
Properties
General
| Property | Value | Condition | Testing Standard |
|---|---|---|---|
Density | 1.03 g/cm³ Show Supplier Material materials with Density of 1.03 g/cm³ | dry | ISO 1183 |
Moisture absorption | 1.3 % Show Supplier Material materials with Moisture absorption of 1.3 % | Sim. to ISO 62 | |
Water absorption | 3.3 % Show Supplier Material materials with Water absorption of 3.3 % | Sim. to ISO 62 |
Mechanical
| Property | Temperature | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|---|
Elastic modulus | 1.9 GPa Show Supplier Material materials with Elastic modulus of 1.9 GPa | cond. | ISO 527-1/-2 | ||
Elongation | 50 % Show Supplier Material materials with Elongation of 50 % | cond. | ISO 527-1/-2 | min. | nominal | |
530 % Show Supplier Material materials with Elongation of 530 % | dry | ISO 527-3 | Transverse | ||
530 % Show Supplier Material materials with Elongation of 530 % | dry | ISO 527-3 | |||
Elongation at yield | 3.4 % Show Supplier Material materials with Elongation at yield of 3.4 % | cond. | ISO 527-1/-2 | ||
20 % Show Supplier Material materials with Elongation at yield of 20 % | dry | ISO 527-3 | |||
Elongation at yield, transverse | 15 % Show Supplier Material materials with Elongation at yield, transverse of 15 % | dry | ISO 527-3 | ||
Hardness, Shore D | 73 [-] Show Supplier Material materials with Hardness, Shore D of 73 [-] | dry | ISO 7619-1 | 15 seconds | |
Impact strength, Charpy notched | 23 °C | 9 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 9 kJ/m² | cond. | ISO 179/1eA | |
Impact strength, Charpy unnotched | No Break at 23°C | cond. | ISO 179/1eU | ||
Tear force | 35 N Show Supplier Material materials with Tear force of 35 N | ISO 6383-2 | Transverse | ||
40 N Show Supplier Material materials with Tear force of 40 N | ISO 6383-2 | ||||
Tensile strength | 60 MPa Show Supplier Material materials with Tensile strength of 60 MPa | dry | ISO 527-3 | Transverse | |
80 MPa Show Supplier Material materials with Tensile strength of 80 MPa | dry | ISO 527-3 | |||
Yield strength | 33 MPa Show Supplier Material materials with Yield strength of 33 MPa | dry | ISO 527-3 | Transverse | |
47 MPa Show Supplier Material materials with Yield strength of 47 MPa | cond. | ISO 527-1/-2 | |||
55 MPa Show Supplier Material materials with Yield strength of 55 MPa | dry | ISO 527-1/-2 |
Thermal
| Property | Value | Condition | Testing Standard | Pressure | Comment | ||||
|---|---|---|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 9.3e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 9.3e-05 1/K | dry | ISO 11359-1/-2 | ||||||
0.000133 1/K Show Supplier Material materials with Coefficient of thermal expansion of 0.000133 1/K | dry | ISO 11359-1/-2 | Transverse | ||||||
Heat deflection temperature | 75 °C Show Supplier Material materials with Heat deflection temperature of 75 °C | dry | ISO 75-1/-2 | 2 MPa | |||||
130 °C Show Supplier Material materials with Heat deflection temperature of 130 °C | dry | ISO 75-1/-2 | 0.45 MPa | ||||||
Melting point | 220 °C Show Supplier Material materials with Melting point of 220 °C | dry | ISO 11357-1/-3 | 10°C/min | |||||
Vicat softening temperature | 134 °C Show Supplier Material materials with Vicat softening temperature of 134 °C | ISO 306 | 50°C/h 50N | ||||||
Flammability | At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB | ||||||||
Electrical
| Property | Value | Condition | Testing Standard | Frequency | Comment |
|---|---|---|---|---|---|
Comparative tracking index | 600 V Show Supplier Material materials with Comparative tracking index of 600 V | cond. | IEC 60112 | ||
Dielectric constant | 3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | cond. | IEC 60250 | 100Hz | |
3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | IEC 60250 | 1MHz | |||
Dielectric strength | 38 kV/mm Show Supplier Material materials with Dielectric strength of 38 kV/mm | cond., dry | IEC 60243-1 | ||
Dissipation factor | 0.025 [-] Show Supplier Material materials with Dissipation factor of 0.025 [-] | cond. | IEC 60250 | 1MHz | |
0.062 [-] Show Supplier Material materials with Dissipation factor of 0.062 [-] | cond. | IEC 60250 | 100Hz | ||
Surface resistivity | 1e+15 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+15 Ω/sq | cond. | IEC 60093 | min. | |
Volume resistivity | 1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm | cond. | IEC 60093 | min. |
Rheological Properties
| Property | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|
Melt volume-flow rate | 2.5 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 2.5 cm³/10min | dry | ISO 1133 | 235°C/2.16kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Mold Release Film | |
| Processing methods | Injection Molding: Film Extrusion: | |