General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Density | 1.18 g/cm³ Show Supplier Material materials with Density of 1.18 g/cm³ | dry | ISO 1183 |
Moisture absorption | 1.1 % Show Supplier Material materials with Moisture absorption of 1.1 % | Sim. to ISO 62 | |
Water absorption | 2.3 % Show Supplier Material materials with Water absorption of 2.3 % | Sim. to ISO 62 |
Mechanical
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Elastic modulus | 6 GPa Show Supplier Material materials with Elastic modulus of 6 GPa | cond. | ISO 527-1/-2 | ||
6.3 GPa Show Supplier Material materials with Elastic modulus of 6.3 GPa | dry | ISO 527-1/-2 | |||
Elongation | 3 % Show Supplier Material materials with Elongation of 3 % | cond., dry | ISO 527-1/-2 | ||
Hardness, Shore D | 78 [-] Show Supplier Material materials with Hardness, Shore D of 78 [-] | dry | ISO 7619-1 | 15 seconds | |
Impact strength, Charpy notched | 23 °C | 11 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 11 kJ/m² | dry | ISO 179/1eA | |
23 °C | 13 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 13 kJ/m² | cond. | ISO 179/1eA | ||
Impact strength, Charpy unnotched | No Break at 23°C | cond. | ISO 179/1eU | ||
Tensile strength | 110 MPa Show Supplier Material materials with Tensile strength of 110 MPa | cond. | ISO 527-1/-2 | ||
115 MPa Show Supplier Material materials with Tensile strength of 115 MPa | dry | ISO 527-1/-2 |
Thermal
Property | Value | Condition | Testing Standard | Pressure | Comment | ||||
---|---|---|---|---|---|---|---|---|---|
Heat deflection temperature | 220 °C Show Supplier Material materials with Heat deflection temperature of 220 °C | dry | ISO 75-1/-2 | 2 MPa | |||||
240 °C Show Supplier Material materials with Heat deflection temperature of 240 °C | dry | ISO 75-1/-2 | 0.45 MPa | ||||||
Melting point | 255 °C Show Supplier Material materials with Melting point of 255 °C | dry | ISO 11357-1/-3 | 10°C/min | |||||
Vicat softening temperature | 195 °C Show Supplier Material materials with Vicat softening temperature of 195 °C | ISO 306 | 50°C/h 50N | ||||||
Flammability | At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB |
Electrical
Property | Value | Condition | Testing Standard | Frequency | Comment |
---|---|---|---|---|---|
Comparative tracking index | 600 V Show Supplier Material materials with Comparative tracking index of 600 V | cond. | IEC 60112 | ||
Dielectric constant | 3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | cond. | IEC 60250 | 100Hz | |
4 [-] Show Supplier Material materials with Dielectric constant of 4 [-] | IEC 60250 | 1MHz | |||
Dielectric strength | 35 kV/mm Show Supplier Material materials with Dielectric strength of 35 kV/mm | cond., dry | IEC 60243-1 | ||
Dissipation factor | 0.017 [-] Show Supplier Material materials with Dissipation factor of 0.017 [-] | cond. | IEC 60250 | 1MHz | |
0.028 [-] Show Supplier Material materials with Dissipation factor of 0.028 [-] | cond. | IEC 60250 | 100Hz | ||
Surface resistivity | 1e+15 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+15 Ω/sq | cond. | IEC 60093 | min. | |
Volume resistivity | 1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm | cond. | IEC 60093 | min. |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Melt volume-flow rate | 11 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 11 cm³/10min | dry | ISO 1133 | 275°C/2.16kg |
Shrinkage | 0.4 % Show Supplier Material materials with Shrinkage of 0.4 % | dry | ISO 294-4 | |
0.6 % Show Supplier Material materials with Shrinkage of 0.6 % | dry | ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Connectors E&E | |
Fillers | 20% Glass Fiber | |
Processing methods | Injection Molding: |