Platamid® M 1657

Alternative and trade names
PA*
Want to keep this datasheet? Save it now in your required format

Description

Platamid® M 1657

Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® M 1657 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments.

Platamid® M 1657 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc).

Platamid® M 1657 has a very good dry cleaning resistance and washing resistance up to 40°C.

This product is available:

  • Dried with optical brightener (M 1657 TA)
  • Un-dried with optical brightener (M 1657 FA)

    PACKAGING

    Platamid® M 1657 TA is delivered in 25 kg sealed bags. Platamid®M 1657 FA is delivered in 25 kg sealed bags and 500 kg sealed big bags (GRVS). These grades are ready to be processed.

    SHELF LIFE

    Two years from the date of delivery. For any use above this limit, please refer to our technical services.

  • This material data has been provided by Arkema Technical Polymers.

    "Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    Properties

    General

    PropertyValueConditionTesting Standard

    Density

    1.07 g/cm³

    Show Supplier Material materials with Density of 1.07 g/cm³

    dry

    ISO 1183

    Thermal

    PropertyValueConditionTesting StandardComment

    Melting point

    107 °C

    Show Supplier Material materials with Melting point of 107 °C

    dry

    ISO 11357-1/-3

    10°C/min

    Rheological Properties

    PropertyValueConditionTesting StandardComment

    Melt volume-flow rate

    200 cm³/10min

    Show Supplier Material materials with Melt volume-flow rate of 200 cm³/10min

    dry

    ISO 1133

    160°C/2.16kg

    Technological properties

    Property
    Application areas

    Accessories