Alloy 400 Hot Rolled

Alternative and trade names
Alloy 400

Want to keep this datasheet? Save it now in your required format

Description

Alloy 400 is a nickel-copper alloy that is resistant to sea water and steam at elevated temperatures.

Related Standards

Equivalent Materials

This material data has been provided by Broder Metals Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

Dimension

Property	Value
Diameter	12.7 - 250 mm Show Supplier Material materials with Diameter of 12.7 - 250 mm

Mechanical

Property	Temperature	Value
Elastic modulus	23.0 °C	180 GPa Show Supplier Material materials with Elastic modulus of 180 GPa
Elongation	23.0 °C	30 % Show Supplier Material materials with Elongation of 30 %
Tensile strength	23.0 °C	550 MPa Show Supplier Material materials with Tensile strength of 550 MPa
Yield strength Rp0.2	23.0 °C	310 MPa Show Supplier Material materials with Yield strength Rp0.2 of 310 MPa

Chemical properties

Property	Value
Aluminium	0.5 % Show Supplier Material materials with Aluminium of 0.5 %
Carbon	0.3 % Show Supplier Material materials with Carbon of 0.3 %
Copper	28 - 34 % Show Supplier Material materials with Copper of 28 - 34 %
Iron	2.5 % Show Supplier Material materials with Iron of 2.5 %
Manganese	2 % Show Supplier Material materials with Manganese of 2 %
Nickel	63 - 70 % Show Supplier Material materials with Nickel of 63 - 70 %
Silicon	0.5 % Show Supplier Material materials with Silicon of 0.5 %
Sulfur	0.24 % Show Supplier Material materials with Sulfur of 0.24 %

Technological properties

Property
Application areas	Valves, Fasteners and Marine engineering, Chemical and hydrocarbon processing equipment, Pumps, Propeller shafts, Oil and fresh water tanks, Fittings, Heat exchangers