Customize your search with filters

Material Supplied by

CERATIZIT

CTCK110 (CVD coated carbide)

.XLSX
.PDF
Save

Description

The CTCK110 grade is Ceratizit's high-performance grade for cast iron machining. This extremely wear-resistant grade for the K10 ISO application range is used when cast iron is machined at high cutting parameters. The prerequisites for this type of machining are a continuous cut and a stable machining situation.

Primary standard name

Equivalent standard names

Properties

General

Grain structure

Fine grain size (of hard metal base material)

Layer system

CVD / Ti(CN) + Al₂O₃

Mechanical

Flexural strength σbend

2900 MPa at 20 °C

DIN EN ISO 7438 (of hard metal base material)

Fracture toughness KIC

9 MPa·√m at 20 °C

of hard metal base material

Hardness, Vickers, 30 HV 30

1810 [-] at 20 °C

of hard metal base material

Chemical properties

Element

Weight %

Comment

W

-

WC balance

Co

5 %

C

2 %

as mixed carbide

Technological properties

Application areas

The first choice for the machining of cast iron at high cutting speeds with continuous cut.

Coating

CVD coated

This material data has been provided by Ceratizit.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.