The material: 'Alloy 625 Inconel® Nickel Alloy' you were looking for has been superseded by the one below.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 8.44 g/cm³ Show Material materials with Density of 8.44 g/cm³ |
Mechanical
| Property | Temperature | Value |
|---|---|---|
Elastic modulus | 23.0 °C | 207 GPa Show Material materials with Elastic modulus of 207 GPa |
Elongation | 23.0 °C | 30 % Show Material materials with Elongation of 30 % |
Tensile strength | 23.0 °C | 690 - 830 MPa Show Material materials with Tensile strength of 690 - 830 MPa |
Yield strength Rp0.2 | 23.0 °C | 275 - 415 MPa Show Material materials with Yield strength Rp0.2 of 275 - 415 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.28E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.28E-5 1/K | for 0-100°C |
Melting point | 1290 - 1350 °C Show Material materials with Melting point of 1290 - 1350 °C | ||
Thermal conductivity | 23.0 °C | 9.8 W/(m·K) Show Material materials with Thermal conductivity of 9.8 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 23.0 °C | 1.32E-6 Ω·m Show Material materials with Electrical resistivity of 1.32E-6 Ω·m |
Magnetic
| Property | Temperature | Value | Comment |
|---|---|---|---|
Relative magnetic permeability | 23.0 °C | 1 [-] Show Material materials with Relative magnetic permeability of 1 [-] | max. |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.2 % Show Material materials with Aluminium of 0.2 % | |
Chromium | 22 % Show Material materials with Chromium of 22 % | |
Iron | 2 % Show Material materials with Iron of 2 % | |
Molybdenum | 9 % Show Material materials with Molybdenum of 9 % | |
Nickel | 58 - 61 % Show Material materials with Nickel of 58 - 61 % | |
Niobium | 3.5 % Show Material materials with Niobium of 3.5 % | Nb+Ta |
Tantalum | 3.5 % Show Material materials with Tantalum of 3.5 % | Nb+Ta |
Titanium | 0.2 % Show Material materials with Titanium of 0.2 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Offshore & marine: Components where exposure to sea water and high mechanical stresses are required, oil and gas production where hydrogen sulphide and elementary sulphur exist at temperature in excess of 150C, flare stacks, hydrocarbon processing from tar-sand and oil-shale recovery projects;Chemical processing: Flue gas desulphurisation plant, flare stacks, offshore sour oil and gas production, waste incineration, phosphoric acid production and nuclear fuel processing | |
| Corrosion properties | Very good corrosion resistance | |