General
Property | Value |
---|---|
Density | 1.42 g/cm³ Show Supplier Material materials with Density of 1.42 g/cm³ |
Mechanical
Property | Value | Testing Standard |
---|---|---|
Elastic modulus | 1.1 GPa Show Supplier Material materials with Elastic modulus of 1.1 GPa | DIN EN ISO 527-1 |
Elongation | 9.5 % Show Supplier Material materials with Elongation of 9.5 % | DIN EN ISO 527-1 |
Impact strength, Charpy unnotched | 28 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 28 kJ/m² | DIN EN ISO 179-1eU |
Tensile strength | 18 MPa Show Supplier Material materials with Tensile strength of 18 MPa | DIN EN ISO 527-1 |
Thermal
Property | Value | Testing Standard | Comment |
---|---|---|---|
Glass transition temperature | -100 °C Show Supplier Material materials with Glass transition temperature of -100 °C | DIN 53765 | |
Max service temperature | 70 °C Show Supplier Material materials with Max service temperature of 70 °C | Long | |
100 °C Show Supplier Material materials with Max service temperature of 100 °C | Short | ||
Melting point | 109 °C Show Supplier Material materials with Melting point of 109 °C |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Melt mass-flow rate | 11 g/10min Show Supplier Material materials with Melt mass-flow rate of 11 g/10min | DIN EN ISO 1133 | 230°C/2.16kg |
Shrinkage | 1.9 % Show Supplier Material materials with Shrinkage of 1.9 % | DIN EN ISO 294-4 | |
3.5 % Show Supplier Material materials with Shrinkage of 3.5 % | DIN EN ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Certifications | Explanation of food contact according to FDA and EU 10/2011 on request | |
Color | Blue | |
Detectability | Inductive: 6 mm Al | |
Fillers | Mineral Powder | |
Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 4, mould temperature (°C): 60, material temperature (°C): 240, cylinder/processing temperature (°C): 240 |