G.AL® C250 ELOX PLUS, precision milled plate

Want to keep this datasheet? Save it now in your required format

Description

Rolling ingots are used for the production of G.AL® C250 ELOXPLUS plates. The chemical composition of these ingots is considerably limited in accordance with the GLEICH factory standard and extensive cleaning of the melt and specific casting parameters are required. Together with the specially-developed parameters of the subsequent heat treatment, Gleich produces aluminum plates which have excellent characteristics for anodizing and hard anodizing and thus the fulfill the highest technical and optical applications. As with G.AL® C250, G.AL® C250 ELOX PLUS is a precision cast plate, precision machined on both sides with protective foil.

Equivalent Materials

This material data has been provided by Gleich Aluminum.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	2.66 g/cm³ Show Supplier Material materials with Density of 2.66 g/cm³
Surface roughness		0.4 μm Show Supplier Material materials with Surface roughness of 0.4 μm

Dimension

Property	Value
Width	1520 mm Show Supplier Material materials with Width of 1520 mm
Dimensions	Standard stock sizes: 1520mmx3020mm and 10-40mm in thickness

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	70 GPa Show Supplier Material materials with Elastic modulus of 70 GPa
Elongation	23.0 °C	10 - 15 % Show Supplier Material materials with Elongation of 10 - 15 %
Hardness, HBW	23.0 °C	68 - 73 [-] Show Supplier Material materials with Hardness, HBW of 68 - 73 [-]	Test method: 2.5/62.5
Tensile strength	23.0 °C	230 - 260 MPa Show Supplier Material materials with Tensile strength of 230 - 260 MPa
Yield strength Rp0.2	23.0 °C	110 - 130 MPa Show Supplier Material materials with Yield strength Rp0.2 of 110 - 130 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	2.36E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 2.36E-5 1/K
Specific heat capacity	23.0 °C	900 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 900 J/(kg·K)
Thermal conductivity	23.0 °C	110 - 130 W/(m·K) Show Supplier Material materials with Thermal conductivity of 110 - 130 W/(m·K)

Electrical

Property	Temperature	Value
Electrical conductivity	23.0 °C	1.60E+7 - 1.80E+7 S/m Show Supplier Material materials with Electrical conductivity of 1.60E+7 - 1.80E+7 S/m

Technological properties

Property
Other	Non heat treatable alloy
Processing history	Temper: O3, homogenized and stress relieved

G.AL® C250 ELOX PLUS, precision milled plate

Description

Equivalent Materials

Ashby charts

Applications

Materials by this supplier

Properties