G.AL® 7075GF, Al rolled plate

Want to keep this datasheet? Save it now in your required format

Description

In certain applications, the use of higher-strength cast plates is not sufficient; high-strength rolled plates must be used. However, the problem with rolled plates is the wide toleration of thickness and flatness, which results in extremely complex processing. Precision rolled plate G.AL® 7075GF from alloy EN AW 7075 (AlZn5.5MgCu), finely milled on both sides and covered with protective foil, provides users with a semi-finished product which drastically reduces the time required for machining.

Equivalent Materials

This material data has been provided by Gleich Aluminum.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	2.8 g/cm³ Show Supplier Material materials with Density of 2.8 g/cm³
Surface roughness		0.4 μm Show Supplier Material materials with Surface roughness of 0.4 μm

Dimension

Property	Value
Width	1520 mm Show Supplier Material materials with Width of 1520 mm
Dimensions	Standard stock sizes: 1520mm x 3020mm and 12-40mm in thickness

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	71 GPa Show Supplier Material materials with Elastic modulus of 71 GPa
Elongation A50	23.0 °C	5 - 8 % Show Supplier Material materials with Elongation A50 of 5 - 8 %
Hardness, HBW	23.0 °C	158 - 161 [-] Show Supplier Material materials with Hardness, HBW of 158 - 161 [-]	Test method: 2.5/62.5
Tensile strength	23.0 °C	530 - 540 MPa Show Supplier Material materials with Tensile strength of 530 - 540 MPa
Yield strength Rp0.2	23.0 °C	460 - 470 MPa Show Supplier Material materials with Yield strength Rp0.2 of 460 - 470 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	2.34E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 2.34E-5 1/K
Specific heat capacity	23.0 °C	862 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 862 J/(kg·K)
Thermal conductivity	23.0 °C	130 - 160 W/(m·K) Show Supplier Material materials with Thermal conductivity of 130 - 160 W/(m·K)

Electrical

Property	Temperature	Value
Electrical conductivity	23.0 °C	1.90E+7 - 2.30E+7 S/m Show Supplier Material materials with Electrical conductivity of 1.90E+7 - 2.30E+7 S/m

Technological properties

Property
Other	Heat treatable alloy
Processing history	Temper: T651

G.AL® 7075GF, Al rolled plate

Description

Equivalent Materials

Ashby charts

Materials by this supplier

Properties