Search for materials or suppliers

Aluminium Alloy FA6800 H14SR

Supplied by Gränges
Contact supplier
View full profile


A strong material with good sag resistance. This alloy is suited for controlled atmosphere brazing.

Chemical composition

Element Weight %
Mn 1.4 — 1.8
Si 0.65 — 1.0
Fe 0.0 — 0.4
Zr 0.05 — 0.2
Zn 0.0 — 0.1
Mg 0.0 — 0.05
Cu 0.0 — 0.05



Elongation A50 [ A50 ]

0.50 %

Tensile strength [ Rm ]

180.00—220.00 MPa

Yield strength Rp0.2 [ Rp0.2 ]

160.00 MPa


All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties

Corrosion properties
Corrosion potential (ASTM G69) measured on brazed unclad fin material -730 mV vs SCE
Standard process capabilities: width 10-1400mm; thickness 0.050-3.18mm
The FA68XX alloy family is a reliable and thoroughly evaluated fin alloy family that is characterised by a high post braze strength, and a good sagging resistance during brazing. The alloy is designed to form large grains during brazing, which is beneficial for the sagging behaviour and hinders braze metal penetration into the core. The high manganese and silicon content contribute to a higher strength after brazing. The corrosion resistance of the fin alloys is good, with a low self corrosion rate. FA68xx is available in four different zinc levels to allow for a tailored cathodic protection of tubes and fillets.
Processing history
Temper: H14SR
This material data has been provided by Gränges.

Download material data

Material data to download as .xlsx and .pdf file.


Discover Materials

More materials from this supplier

Similar Materials

These are materials almost identical to the ones you are looking at. They could be a relevant standard or a different supplier.

There are no similar materials at this moment.
Go to to find materials similar to Aluminium Alloy FA6800 H14SR.