Injicera CPX 219

Alternative and trade names
Injicera CPX 219
Want to keep this datasheet? Save it now in your required format

Description

Injection grade bio resin developed to process molded products.

This material data has been provided by Indochine Bio Plastiques (ICBP) Sdn. Bhd..

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValue

Bio-based content

100 %

Show Supplier Material materials with Bio-based content of 100 %

Density

23.0 °C

1.1 g/cm³

Show Supplier Material materials with Density of 1.1 g/cm³

Mechanical

PropertyTemperatureValue

Elongation

23.0 °C

10 %

Show Supplier Material materials with Elongation of 10 %

Flexural modulus

23.0 °C

5 GPa

Show Supplier Material materials with Flexural modulus of 5 GPa

Flexural strength

23.0 °C

75 MPa

Show Supplier Material materials with Flexural strength of 75 MPa

Hardness, Shore D

23.0 °C

76 [-]

Show Supplier Material materials with Hardness, Shore D of 76 [-]

Impact strength, Izod unnotched, ASTM

23.0 °C

15 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 15 J/m

Tensile strength

23.0 °C

60 MPa

Show Supplier Material materials with Tensile strength of 60 MPa

Thermal

PropertyValue

Decomposition heat

250 J/g

Show Supplier Material materials with Decomposition heat of 250 J/g

Max service temperature

250 °C

Show Supplier Material materials with Max service temperature of 250 °C

Melting point

170 °C

Show Supplier Material materials with Melting point of 170 °C

Rheological Properties

PropertyValueComment

Melt mass-flow rate

20 g/10min

Show Supplier Material materials with Melt mass-flow rate of 20 g/10min

175°C/5 kg

Technological properties

Property
Application areas

Molded products, cutleries, tableware (<120°C)

Certifications

Food Contact: Halal

Processing methods

1. Clean extruder with general purpose polypropylene or polystyrene. 2. Vacuum out hopper system to avoid contamination and make sure that the humidity of the air is below 40°C at dew point. 3. Introduce ICBP Bio Resin in to the extruder at the operating conditions used in the first step. 4. Once ICBP Bio Resin has been purged, reduce barrel temperatures to desired set points. 5. At shutdown, purge machine with PP or PS.