ОоА prepreg B180

.XLSX
.PDF
Save

Description

В180 is a prepreg based on epoxy resin and reinforcing filler (unidirectional tapes or fabrics of various weaving) for producing details with operating temperatures up to 150°C. Out-of-autoclave prepreg technology has the most advantages of autoclave. The autoclave is not required for processing the prepreg B180. Curing takes place in a vacuum bag, with the technology of the package laminating slightly different from the vacuum infusion. It shows the following features and properties:


  • High mechanical performance
  • Possibility of application in loaded parts at service temperatures up to 120°C
  • Less stringent requirements for working staff
  • Glass transition temperature 154°C
  • Out of autoclave processing
  • Properties

    General

    Water absorption cwater

    4.17 % at 20 °C

    for 54h to boiling water

    Mechanical

    Flexural strength σbend

    162 MPa at 20 °C

    ASTM D790

    Fracture toughness KIC

    1.88 MPa·√m at 20 °C

    ASTM D5045

    Strain energy release GIC

    ASTM D5045

    Tensile strength Rm

    94 MPa at 20 °C

    ASTM D638

    Thermal

    Glass transition temperature Tg

    175 °C

    ASTM E2092

    Technological properties

    Application areas

    Marine: The shells of boats and sport catamarans can be made of composites;Car tuning: The composite material provides solutions for automotive parts to be light-weighted, stylish and aesthetic;Sports equipment: Frame, wheels, seat, seat post, handlebar, head stem and crank arm of a sports bicycle are made of carbon composite

    Processing methods

    Holding at a temperature of 25-30°C, for 12 hours, a vacuum of -1 bar. Heating 2°C/min. up to 120°C, holding at 120°C for 180 minutes. Heating 2°C/min. up to 180°C, holding at 180°C for 180 minutes, cooling no faster than 5°C/min. up to 50°С.

    This material data has been provided by Itecma.

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.