SEBS 7070K4

Alternative and trade names
TPE 7070K4
Want to keep this datasheet? Save it now in your required format

Description

TPE-S 70A

This material data has been provided by Lingen Plastic Rubber Co..

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.05 g/cm³

Show Supplier Material materials with Density of 1.05 g/cm³

ASTM D297

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

500 %

Show Supplier Material materials with Elongation of 500 %

ASTM D412

Hardness, Shore A

23.0 °C

70 [-]

Show Supplier Material materials with Hardness, Shore A of 70 [-]

Tensile strength

23.0 °C

7 MPa

Show Supplier Material materials with Tensile strength of 7 MPa

ASTM D412

Impact strength, Izod notched, ASTM

No Break

Impact strength, Izod unnotched, ASTM

No Break

Thermal

PropertyValue

Flammability

HB

Electrical

PropertyTemperatureValueComment

Dielectric constant, 1MHz

23.0 °C

2.3 [-]

Show Supplier Material materials with Dielectric constant, 1MHz of 2.3 [-]

ASTM D150

Dielectric strength

23.0 °C

28 kV/mm

Show Supplier Material materials with Dielectric strength of 28 kV/mm

ASTM D149

Dissipation factor, 1MHz

23.0 °C

4E-3 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 4E-3 [-]

ASTM D150

Volume resistivity

23.0 °C

1.00E+19 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.00E+19 Ω·cm

min., ASTM D257

Technological properties

Property
Application areas

Automotive interior

Fillers

25% Calcium Carbonate

Processing methods

Injection Molding, Extrusion

Do you have a technical question or need more information about this material?

Post it as a comment below and receive answers from engineers and other community members.