SABIC® PS 325

Want to keep this datasheet? Save it now in your required format

Description

PS 325 is High Impact Polystyrene manufactured by continuous mass polymerization of styrene monomer. An elastomer is incorporated during polymerization to achieve impact resistance property. It is generally opaque in color. It is having medium flow characteristics with high tensile and flexural strength with medium heat deflection and vicat temperatures.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Bulk density	23.0 °C	0.6 g/cm³ Show Material materials with Bulk density of 0.6 g/cm³	ASTM D 1895

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.16 GPa Show Material materials with Elastic modulus of 2.16 GPa	ASTM D638
Elongation	23.0 °C	50 % Show Material materials with Elongation of 50 %	ASTM D638
Flexural modulus	23.0 °C	2.35 GPa Show Material materials with Flexural modulus of 2.35 GPa	ASTM D 790
Flexural strength	23.0 °C	35 MPa Show Material materials with Flexural strength of 35 MPa	ASTM D790
Hardness, Rockwell L	23.0 °C	60 [-] Show Material materials with Hardness, Rockwell L of 60 [-]	ASTM D785
Tensile strength	23.0 °C	22 MPa Show Material materials with Tensile strength of 22 MPa	ASTM D638

Thermal

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	93 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 93 °C	ASTM D648
Vicat softening temperature	95 °C Show Material materials with Vicat softening temperature of 95 °C	ASTM D 1525 \| Rate A/50°C

Technological properties

Property
Application areas	Air Conditioning,Amusement Machine,ATM/Ticket Machine,Auto Aftermarket,Circuit Protection,Cluster,Console,Cooking Range,Data Transfer,Dishwasher,Document Handling,Door Handle,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Exterior Mirror,Fluid Delivery,Food Transportation,Forward Lighting,Gas/Electric Oven,Heavy Vehicles,Hygiene/Personal Care,Laundry Dryer,Lawn/Garden,LED Lighting,Medical Device,Meter Gas,Meter Water,Monitoring and Imaging,Motorcycle,Non-LED Lighting,Personal Computing,Power Manangement,Rear/Signal Lighting,Refrigerator,Respiratory,Small Appliance,Surgical Devices,Swimming Pool/Spa,Trim,Watch/Jewelry,Wireless Communications,Wiring Devices,Irrigation,Wire & cable

SABIC® PS 325

Description

Ashby charts

Suggested reading

Properties