LEXAN™ FR Resins BY2710X

Want to keep this datasheet? Save it now in your required format

Description

LEXAN BY2710X Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled, flame retardant grade with good flow and impact performance. It has an MVR of 15 (300°C/1.2kg), UL94 V0@1.5mm, is available in various opaque color options.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.19 g/cm³

Show Material materials with Density of 1.19 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.22 GPa

Show Material materials with Elastic modulus of 2.22 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

100 %

Show Material materials with Elongation of 100 %

ASTM D 638 | Type I, 50 mm/min

Elongation at yield

23.0 °C

6 %

Show Material materials with Elongation at yield of 6 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.07 GPa

Show Material materials with Flexural modulus of 2.07 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural yield strength

23.0 °C

90 MPa

Show Material materials with Flexural yield strength of 90 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

800 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 800 J/m

ASTM D 256

Tensile strength

23.0 °C

61 MPa

Show Material materials with Tensile strength of 61 MPa

ASTM D 638 | Type I, 50 mm/min

Yield strength

23.0 °C

60 MPa

Show Material materials with Yield strength of 60 MPa

ASTM D 638 | Type I, 50 mm/min

Thermal

PropertyValueComment

Relative temperature index, electrical

130 °C

Show Material materials with Relative temperature index, electrical of 130 °C

UL 746B

Relative temperature index, mechanical impact

115 °C

Show Material materials with Relative temperature index, mechanical impact of 115 °C

UL 746B

Relative temperature index, mechanical strength

125 °C

Show Material materials with Relative temperature index, mechanical strength of 125 °C

UL 746B

Vicat softening temperature

139 °C

Show Material materials with Vicat softening temperature of 139 °C

ASTM D 1525 | Rate B/50

Flammability

UL Recognized, 94V-0 Flame Class Rating | 1.5mm | UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

15 g/10min

Show Material materials with Melt mass-flow rate of 15 g/10min

ASTM D 1238 | 300°C/1.2 kg

Shrinkage

23.0 °C

0.6 - 0.8 %

Show Material materials with Shrinkage of 0.6 - 0.8 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Data Transfer,Displays,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Personal Computing,Power Manangement,Wireless Communications,Wiring Devices

Processing methods

Drying Temperature: 120°C, Drying Time: 3-4hrs, Drying Time (Cumulative): 48hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 295-315°C, Nozzle Temperature: 290-310°C, Front - Zone 3 Temperature: 295-315°C, Middle - Zone 2 Temperature: 280-305°C, Rear - Zone 1 Temperature: 270-295°C, Mold Temperature: 70-95°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 40-70rpm, Shot to Cylinder Size: 40-60%, Vent Depth: 0.025-0.076mm