MULTIFLEX™ TES A7005 YPA1 NAT

Want to keep this datasheet? Save it now in your required format

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.05 g/cm³

Show Material materials with Density of 1.05 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

650 %

Show Material materials with Elongation of 650 %

ISO 527-1/-2

Hardness, Shore A

23.0 °C

80 [-]

Show Material materials with Hardness, Shore A of 80 [-]

ISO 7619-1 | 3 seconds

Tear strength

23.0 °C

34 kN/m

Show Material materials with Tear strength of 34 kN/m

ISO 34-1

Tensile strength

23.0 °C

8 MPa

Show Material materials with Tensile strength of 8 MPa

ISO 527-1/-2

Technological properties

Property
Processing methods

Drying Recommended: no, Melt Temperature Optimum: 180°C, Mold Temperature Optimum: 60°C, Min. mold temperature: 50°C, Max. mold temperature: 70°C, Hold pressure range: as low as possible, Back pressure: 1MPa