MULTIFLEX™ A1004 B Z4775 N0200

Want to keep this datasheet? Save it now in your required format

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts





23.0 °C

1.02 g/cm³

Show Material materials with Density of 1.02 g/cm³

ISO 1183




23.0 °C

550 %

Show Material materials with Elongation of 550 %

ISO 527-1/-2

Hardness, Shore A

23.0 °C

63 [-]

Show Material materials with Hardness, Shore A of 63 [-]

ISO 7619-1 | 3 seconds

Tear strength

23.0 °C

46 kN/m

Show Material materials with Tear strength of 46 kN/m

ISO 34-1

Tensile strength

23.0 °C

13 MPa

Show Material materials with Tensile strength of 13 MPa

ISO 527-1/-2

Technological properties

Processing methods

Drying Recommended: yes, Drying Temperature: 95°C, Drying Time, Dehumidified Dryer: 4-6h, Melt Temperature Optimum: 190°C, Mold Temperature Optimum: 30°C, Min. mold temperature: 10°C, Max. mold temperature: 50°C, Hold pressure range: as low as possible, Back pressure: 1.5MPa