Show Supplier Material materials with Carbon of 0.08 %
Show Supplier Material materials with Hydrogen of 0.02 %
Show Supplier Material materials with Iron of 0.5 %
Show Supplier Material materials with Nitrogen of 0.05 %
Show Supplier Material materials with Oxygen of 0.4 %
Store in the original container in a dry location; Open containers should be stored in a drying oven below 38°C (100 °F) to prevent moisture pickup; Tumble contents prior to use to prevent material segregation.
Angular / blocky
Use fine powders such as Metco 4010C to produce relatively smooth and dense coatings. These types of coatings may be suitable for applications requiring corrosion resistance. Grade 4 titanium powders are recommended for use in biomedical applications. For some biomedical applications, layers of both the fine and the coarse powders may be applied serving different functions. HDH powder products are less expensive than atomized powder products.
1.5 kg (approx. 3.3 lb)
HDH (hydride-dehydride) process from wrought raw materials
ChamPro™, Cold Spray, High Speed Laser Cladding (HS-LC)
|Safety data sheet|
www.oerlikon.com/metco SDS No. 50-2147