Oerlikon Metco’s CoCr[NiWSi]C products are inert gas atomized powders that are chemically homogeneous, exhibit minimal satellites and are freely flowing. They are designed and provide excellent results for a variety of applications such as laser cladding, thermal spray and PTA. These materials form coatings that are appropriate for wear and corrosion resistance in relatively high-temperature service conditions.
Diamalloy 4060NS has a chemical composition similar to that of Stellite 6. Diamalloy 4060NS is designed for HVOF applications.
Particle size rangedrange
11 - 45 µm
Nominal range -45 +11µm: +5% 45µm, -2% 11µm
1260 - 1357 °C
10 lb (approx. 4.5 kg): 1037003; 5 kg (approx. 11 lb): 1300203
Diamalloy 4060NS is used as a general restoration and repair material when compatibility with Stellite 6 is desired. When applied using HVOF, it forms dense, wear-resistant and oxidation-resistant coatings that may be used for turbine hot section applications such as combustion liners
10 lb (approx. 4.5 kg), 5 kg (approx. 11 lb)
High Velocity Oxygen Fuel Spray (HVOF), Atmospheric Plasma Spray, Combustion Powder Thermospray
Safety data sheet
www.oerlikon.com/metco SDS No. 50-505
This material data has been provided by Metco.