This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

Amdry 625 Nickel Chromium Superalloy Atomized Thermal Spray Powder

Alternative and trade names
similar to Inconel 625 (Inconel is a registered trademark of Huntington Alloys Corp.), Diamalloy 1005, Diamalloy 1005A
.XLSX
.PDF
Save

Description

Oerlikon Metco’s nickel-chromium based superalloy powders produce dense, self-bonding, single-step coatings that are oxidation and corrosion resistant at elevated temperatures.


Their compositions are similar to Inconels, thus the coatings have excellent high temperature oxidation and corrosion resistance for restoration and repair of superalloy components. They are also recommended as overlay coatings to protect less noble materials from oxidation.


The coatings exhibit high tensile bond strength and thickness limits exceeding 1.5 - 2.5 mm (0.06 - 0.1 in) when sprayed with liquid-fuel or gas-fuel HVOF guns, depending on part geometry. The coatings can be machined, milled, drilled and tapped without chipping and excellent edge retention.

Properties

General

Morphology

Spheroidal

Particle size range drange

45 - 90 µm

Thermal

Max service temperature Tmax

982 °C

Chemical properties

Element

Weight %

Comment

Ni

-

balance

Cr

21.5 %

Mo

9 %

Nb+Ta

3.7 %

Fe

2.5 %

Technological properties

Application areas

Repair and restoration of mis-machined and worn superalloy components, Gas turbine components, Chemical processing equipment, Pollution control equipment, Pump bodies, Extrusion dies, Rocket engine components

Availability

Stock

Chemical composition

Ni 21.5Cr 2.5Fe 9Mo 3.7(Nb+Ta)

Distribution

Global

Handling recommendations

Store in the original container in a dry location; Tumble contents gently prior to use to prevent segregation; Open containers should be stored in a drying oven to prevent moisture pickup; Remove desiccant prior to use, if applicable.

Order number

1001045

Other

Designed for restoration of worn or mismatched components of Inconel 625 or similar substrates. Amdry 625 is sized for plasma spray.

Packaging size

5 lb (approx. 2.25 kg)

Processing history

Gas atomized

Processing methods

Atmospheric Plasma Spray

Safety data sheet

www.oerlikon.com/metco SDS No. 50-310

This material data has been provided by Metco.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.