Cobalt Chromium Nickel Tungsten Alloy Powder (similar to Mar M 509)

Alternative and trade names
similar to Mar M 509, Amdry MM509, Amdry MM509-C

Want to keep this datasheet? Save it now in your required format

Description

Oerlikon Metco’s CoCr[NiWSi]C products are inert gas atomized powders that are chemically homogeneous, exhibit minimal satellites and are freely flowing. They are designed and provide excellent results for a variety of applications such as laster cladding, thermal spray and PTA. These materials form coatings that are appropriate for wear and corrosion resistance in relatively high-temperature service conditions.

Amdry MM509 series is similar in chemistry to Mar M 509 cast alloy and are best applied using atmospheric plasma spray.

Amdry MM509 series can also be used as complimentary additive to Oerlikon Metco's ADB brazing alloys to facilitate crack and surface repairs.

The materials Amdry MM509 and Amdry MM509-C of this material family differ primarily in their particle size distribution.

This material data has been provided by Oerlikon Metco.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value	Comment
Particle size range	5 - 125 µm Show Supplier Material materials with Particle size range of 5 - 125 µm	Amdry MM509: -45 +5µm: +5% 45µm, -10% 5µm; Amdry MM509-C: -45 +5µm: +5% 125µm, -15% 45µm

Thermal

Property	Value
Melting point	1383 - 1454 °C Show Supplier Material materials with Melting point of 1383 - 1454 °C

Chemical properties

Property	Value	Comment
Carbon	0.6 % Show Supplier Material materials with Carbon of 0.6 %
Chromium	23.5 % Show Supplier Material materials with Chromium of 23.5 %
Nickel	10 % Show Supplier Material materials with Nickel of 10 %
Other	0.3 % Show Supplier Material materials with Other of 0.3 %	max
Tantalum	3.5 % Show Supplier Material materials with Tantalum of 3.5 %
Titanium	0.23 % Show Supplier Material materials with Titanium of 0.23 %
Tungsten	7 % Show Supplier Material materials with Tungsten of 7 %
Zirconium	0.45 % Show Supplier Material materials with Zirconium of 0.45 %

Technological properties

Property
Availability	Stock
Chemical composition	CoCrNiWTaCZrTi
Distribution	Global
Handling recommendations	Store in the original container in a dry location; Tumble contents prior to use to prevent segregation. Open containers should be stored in a drying oven to prevent moisture pickup.
Morphology	Spheroidal
Order number	Amdry MM509: 1002099, Amdry MM509-C: 1059330
Other	These products were designed as complimentary filler metals for repair and wide-gap brazing applications. Amdry MM509 and Amdry MM509-C are similar to Mar M 509 casting alloy that contains carbide-forming elements. As coatings, they are best applied using atmospheric plasma spray and is primarily used for surface restoration of worn or damaged gas turbine parts such as airfoils, combustors, blades and vanes.
Packaging size	Amdry MM509: 5 lb (approx. 2.2 kg), Amdry MM509-C: 10 lb (approx. 4.5 kg)
Processing history	Gas atomized
Processing methods	Amdry MM509: Atmospheric Plasma Spray, Laser Cladding; Amdry MM509-C: Atmospheric Plasma Spray, Laser Cladding, PTA, Brazing
Safety data sheet	www.oerlikon.com/metco SDS No. 50-1023

Cobalt Chromium Nickel Tungsten Alloy Powder (similar to Mar M 509)

Description

Ashby charts

Applications

Materials by this supplier

Use cases

Properties