EN 10277-2 Grade ZSt60-2 cold drawn or turned and normalized

Want to keep this datasheet? Save it now in your required format

Description

ZSt 60-2 is a bright drawn steel grade for wear and strength loaded parts (bolts, shafts, spindles).

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Density of 7.8 - 7.9 g/cm³

Typical for Medium Carbon Steel

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

200 - 215 GPa

Show Material materials with Elastic modulus of 200 - 215 GPa

Typical for Medium Carbon Steel

Elongation

20.0 °C

14 - 16 %

Show Material materials with Elongation of 14 - 16 %

Poisson's ratio

23.0 °C

0.29 [-]

Show Material materials with Poisson's ratio of 0.29 [-]

Typical for Medium Carbon Steel

Shear modulus

23.0 °C

75 - 80 GPa

Show Material materials with Shear modulus of 75 - 80 GPa

Typical for Carbon Steel

Tensile strength

20.0 °C

570 - 710 MPa

Show Material materials with Tensile strength of 570 - 710 MPa

Yield strength

20.0 °C

305 - 335 MPa

Show Material materials with Yield strength of 305 - 335 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.32E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.32E-5 1/K

Typical for Medium Carbon Steel

Max service temperature

500 °C

Show Material materials with Max service temperature of 500 °C

Typical for Carbon Steel

Melting point

1380 - 1514 °C

Show Material materials with Melting point of 1380 - 1514 °C

Typical for Medium Carbon Steel

Specific heat capacity

23.0 °C

470 - 520 J/(kg·K)

Show Material materials with Specific heat capacity of 470 - 520 J/(kg·K)

Typical for Medium Carbon Steel

Thermal conductivity

23.0 °C

21 - 52 W/(m·K)

Show Material materials with Thermal conductivity of 21 - 52 W/(m·K)

Typical for Medium Carbon Steel

Electrical

PropertyTemperatureValueComment

Electrical resistivity

23.0 °C

1.43E-7 - 1.74E-7 Ω·m

Show Material materials with Electrical resistivity of 1.43E-7 - 1.74E-7 Ω·m

Typical for Carbon Steel

Chemical properties

PropertyValue

Carbon

0.4 %

Show Material materials with Carbon of 0.4 %

Phosphorus

0.05 %

Show Material materials with Phosphorus of 0.05 %

Sulfur

0.05 %

Show Material materials with Sulfur of 0.05 %