EN 10025-4 Grade S275M thermomechanically rolled

Want to keep this datasheet? Save it now in your required format

Description

S275M is a weldable fine-grained steel with a min. yield point of 275 N/mm². The steel is applicated in thermo mechanical rolled condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions. Subsequent heating above 580°C for thermo mechanical rolled products causes reduction of the strength properties. Application limit: at -20°C is warranted a notch impact energy of 40J (longitudinal test specimen). The carbon equivalent (by arrangement) amounts to: for nominal size: < 16 mm: 0,34% > 16 < 40 mm: 0,34% > 40 < 63 mm: 0,35% > 63 < 150 mm: 0,38% Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 12 mm can be warranted the following bending radius values: longitudinal: 2,5 x s transverse: 2 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Warm forming: thermo mechanical rolled products are unsuitable for warm forming. Surface refineability: S275M has to be suitable by arrangement for hot galnanizing and it has to meet the appropriate product quality requirements.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Comment
Density	7.8 g/cm³ Show Material materials with Density of 7.8 g/cm³	Typical for Steel

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		190 - 210 GPa Show Material materials with Elastic modulus of 190 - 210 GPa				Typical for Steel
Elongation		18.1 % Show Material materials with Elongation of 18.1 %				Predicted Value, A200
		20.2 % Show Material materials with Elongation of 20.2 %				Predicted Value, A80
		20.7 % Show Material materials with Elongation of 20.7 %				Predicted Value, A80 Transverse
		21.0 % Show Material materials with Elongation of 21.0 %				Predicted Value, A5
		23.2 % Show Material materials with Elongation of 23.2 %				Predicted Value, Transverse
		24.2 % Show Material materials with Elongation of 24.2 %				Predicted Value, A50
	20 °C	24 % Show Material materials with Elongation of 24 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Hardness, Brinell		243 [-] Show Material materials with Hardness, Brinell of 243 [-]				Predicted Value, Transverse
Poisson's ratio		0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-]				Typical for Steel
Reduction of area		43.2 % Show Material materials with Reduction of area of 43.2 %				Predicted Value
		44.2 % Show Material materials with Reduction of area of 44.2 %				Predicted Value, Transverse
Shear modulus		80.1 GPa Show Material materials with Shear modulus of 80.1 GPa				Predicted Value
Shear strength		529.1 MPa Show Material materials with Shear strength of 529.1 MPa				Predicted Value
Tensile strength	20 °C	350 - 530 MPa Show Material materials with Tensile strength of 350 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 523 MPa Show Material materials with Tensile strength of 350 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 510 MPa Show Material materials with Tensile strength of 350 - 510 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 510 MPa Show Material materials with Tensile strength of 360 - 510 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	360 - 530 MPa Show Material materials with Tensile strength of 360 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 523 MPa Show Material materials with Tensile strength of 360 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 530 MPa Show Material materials with Tensile strength of 370 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 523 MPa Show Material materials with Tensile strength of 370 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 510 MPa Show Material materials with Tensile strength of 370 - 510 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Yield strength		251.4 MPa Show Material materials with Yield strength of 251.4 MPa				Predicted Value, RP1
		318.6 MPa Show Material materials with Yield strength of 318.6 MPa				Predicted Value, RP1 Transverse
		327.9 MPa Show Material materials with Yield strength of 327.9 MPa				Predicted Value, RP02
		352.3 MPa Show Material materials with Yield strength of 352.3 MPa				Predicted Value, Transverse
		417.8 MPa Show Material materials with Yield strength of 417.8 MPa				Predicted Value, RP05
		462.4 MPa Show Material materials with Yield strength of 462.4 MPa				Predicted Value, RP02 Transverse
		485 MPa Show Material materials with Yield strength of 485 MPa				Predicted Value, RP002
	20 °C	240 MPa Show Material materials with Yield strength of 240 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	245 MPa Show Material materials with Yield strength of 245 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	255 MPa Show Material materials with Yield strength of 255 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	265 MPa Show Material materials with Yield strength of 265 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	275 MPa Show Material materials with Yield strength of 275 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire

Thermal

Property	Value	Comment
Coefficient of thermal expansion	11.88 1/K Show Material materials with Coefficient of thermal expansion of 11.88 1/K	Predicted Value
Specific heat capacity	456.8 J/(kg·K) Show Material materials with Specific heat capacity of 456.8 J/(kg·K)	Predicted Value
Thermal conductivity	38.2 W/(m·K) Show Material materials with Thermal conductivity of 38.2 W/(m·K)	Predicted Value

Electrical

Property	Value	Comment
Electrical conductivity	7 S/m Show Material materials with Electrical conductivity of 7 S/m	Predicted Value
Electrical resistivity	35 Ω·m Show Material materials with Electrical resistivity of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminium	0.02 % Show Material materials with Aluminium of 0.02 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Carbon	0.13 % Show Material materials with Carbon of 0.13 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Chromium	0.3 % Show Material materials with Chromium of 0.3 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Copper	0.55 % Show Material materials with Copper of 0.55 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Manganese	1.5 % Show Material materials with Manganese of 1.5 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Molybdenum	0.1 % Show Material materials with Molybdenum of 0.1 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.2 % Show Material materials with Molybdenum of 0.2 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Nickel	0.3 % Show Material materials with Nickel of 0.3 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Niobium	0.05 % Show Material materials with Niobium of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Nitrogen	0.015 % Show Material materials with Nitrogen of 0.015 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Phosphorus	0.03 % Show Material materials with Phosphorus of 0.03 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.035 % Show Material materials with Phosphorus of 0.035 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Silicon	0.5 % Show Material materials with Silicon of 0.5 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Sulfur	0.025 % Show Material materials with Sulfur of 0.025 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.03 % Show Material materials with Sulfur of 0.03 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Titanium	0.05 % Show Material materials with Titanium of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Vanadium	0.08 % Show Material materials with Vanadium of 0.08 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 7 supplier of EN 10025-4 Grade S275M thermomechanically rolled on Matmatch

EN 10025-4 Grade S275M thermomechanically rolled

Description

Related Standards

Equivalent Materials

Ashby charts

There are 4 other suppliers for this grade.

Preview all suppliers

Suggested reading

Properties