EN 10025-5 Grade S355J2WP normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S355J2WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered. Because of the high amount of P special precautions have to take.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Comment
Density	7.9 - 8.2 g/cm³ Show Material materials with Density of 7.9 - 8.2 g/cm³	Typical for Austenitic Stainless Steel

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		195 GPa Show Material materials with Elastic modulus of 195 GPa				Typical for Austenitic Stainless Steel
Elongation		17.7 % Show Material materials with Elongation of 17.7 %				Predicted Value, A200
		22.5 % Show Material materials with Elongation of 22.5 %				Predicted Value, A5
		23.5 % Show Material materials with Elongation of 23.5 %				Predicted Value, A50
	20 °C	14 % Show Material materials with Elongation of 14 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80 Transverse
	20 °C	15 % Show Material materials with Elongation of 15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80 Transverse
	20 °C	16 % Show Material materials with Elongation of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80 Transverse
	20 °C	16 % Show Material materials with Elongation of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80
	20 °C	17 % Show Material materials with Elongation of 17 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80
	20 °C	18 % Show Material materials with Elongation of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	A80
	20 °C	20 % Show Material materials with Elongation of 20 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar	Transverse
	20 °C	22 % Show Material materials with Elongation of 22 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Poisson's ratio		0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-]				Typical for Austenitic Stainless Steel
Shear modulus		77 GPa Show Material materials with Shear modulus of 77 GPa				Typical for Austenitic Stainless Steel
Tensile strength	20 °C	470 - 680 MPa Show Material materials with Tensile strength of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 630 MPa Show Material materials with Tensile strength of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 680 MPa Show Material materials with Tensile strength of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 630 MPa Show Material materials with Tensile strength of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	490 - 680 MPa Show Material materials with Tensile strength of 490 - 680 MPa	normalized or normalized formed (+N)	EN 10155, EN 10025-1, EN 10025-5	Bar, Sheet, Strip, Flat
	20 °C	490 - 630 MPa Show Material materials with Tensile strength of 490 - 630 MPa	normalized or normalized formed (+N)	EN 10155, EN 10025-1, EN 10025-5	Bar, Sheet, Strip, Flat
	20 °C	510 - 680 MPa Show Material materials with Tensile strength of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 630 MPa Show Material materials with Tensile strength of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 680 MPa Show Material materials with Tensile strength of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	510 - 630 MPa Show Material materials with Tensile strength of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Yield strength		263.2 MPa Show Material materials with Yield strength of 263.2 MPa				Predicted Value, RP1
		285.9 MPa Show Material materials with Yield strength of 285.9 MPa				Predicted Value, RP1 Transverse
		354.3 MPa Show Material materials with Yield strength of 354.3 MPa				Predicted Value, RP05
		377.5 MPa Show Material materials with Yield strength of 377.5 MPa				Predicted Value, RP02 Transverse
		388.1 MPa Show Material materials with Yield strength of 388.1 MPa				Predicted Value, RP02
		489.8 MPa Show Material materials with Yield strength of 489.8 MPa				Predicted Value, RP002
	20 °C	345 MPa Show Material materials with Yield strength of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	345 MPa Show Material materials with Yield strength of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	355 MPa Show Material materials with Yield strength of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	355 MPa Show Material materials with Yield strength of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar

Thermal

Property	Value	Comment
Coefficient of thermal expansion	1.7e-05 - 1.9e-05 1/K Show Material materials with Coefficient of thermal expansion of 1.7e-05 - 1.9e-05 1/K	Typical for Austenitic Stainless Steel
Melting point	1230 - 1480 °C Show Material materials with Melting point of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Specific heat capacity	440 J/(kg·K) Show Material materials with Specific heat capacity of 440 J/(kg·K)	Typical for Austenitic Stainless Steel
Thermal conductivity	11 - 21 W/(m·K) Show Material materials with Thermal conductivity of 11 - 21 W/(m·K)	Typical for Austenitic Stainless Steel

Electrical

Property	Value	Comment
Electrical resistivity	8.5e-07 Ω·m Show Material materials with Electrical resistivity of 8.5e-07 Ω·m	Typical for Austenitic Stainless Steel

Chemical properties

Property	Value	Condition	Related Standards	Shape
Carbon	0.12 % Show Material materials with Carbon of 0.12 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Chromium	0.3 - 1.25 % Show Material materials with Chromium of 0.3 - 1.25 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Copper	0.25 - 0.55 % Show Material materials with Copper of 0.25 - 0.55 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Manganese	1 % Show Material materials with Manganese of 1 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Nickel	0.65 % Show Material materials with Nickel of 0.65 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Phosphorus	0.06 - 0.15 % Show Material materials with Phosphorus of 0.06 - 0.15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Silicon	0.75 % Show Material materials with Silicon of 0.75 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155, EN 10025-1	Strip, Sheet, Flat, Rod, Wire, Bar
Sulfur	0.03 % Show Material materials with Sulfur of 0.03 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	0.035 % Show Material materials with Sulfur of 0.035 %	normalized or normalized formed (+N)	EN 10155, EN 10025-1, EN 10025-5	Bar, Sheet, Strip, Flat

Looking for suppliers of this material? Click to see 6 supplier of EN 10025-5 Grade S355J2WP normalized or normalized formed (+N) on Matmatch

EN 10025-5 Grade S355J2WP normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 3 other suppliers for this grade.

Preview all suppliers

Suggested reading

Properties