OUR COOKIE DISCLAIMER
Open cookie settings
The steel HX220YD (X=roll condition, Y=interstitial free, D=hot-dip coatable) is producible with the following coatings: - HX220YD+Z (plating Zn) with coating weights (double-sided) of 100, 140, 200, 225 and 275 g/m² (100 g approximate 7,1 µm per side) - HX220YD+ZF (plating Zn-Fe) with coating weights (double-sided) of 100 and 120 g/m² (100 g approximate 7,1 µm per side) - HX220YD+ZA (plating Zn-Al) with coating weights (double-sided) of 095, 130, 185, 200 and 255 g/m² (95 g approximate 7,2 µm per side) - HX220YD+AZ (plating Al-Zn) with coating weights (double-sided) of 100, 150 and 185 g/m² (100 g approximate 13,3 µm per side) - HX220YD+AS (plating Al-Si) with coating weights (double-sided) of 060 and 080 g/m² (100 g approximate 17 µm per side) The hot dip galvanizing refined flat products are available by arrangement on ordering with different coating weights (also per side). Following surface protection types can be delivered: chemical passivated, oiled, chemical passivated and oiled, sealed, phosphated, phosphated and oiled. Mechanical properties are warranted for a period of 3 months for Bake-hardening steels and for a period of 6 months after provision of the products for all other sorts. The same terms are valid for freedom from stretcher strains (surface type B and C). It is suitable for usual welding methods. For higher coating weights on welding are where approppriate necessary special measures. Furthermore suitability for joining by sticking as well as for application of organic coatings. Application: household appliances industry, construction trade, electrical industry, furniture industry, car industry.
This material data has been provided by WIAM.
We can help
you to find a supplier
We will evaluate your request for EN 10292 Grade HX220YD +Z, +ZF, +ZA, +AZ, +AS,hot rolled or cold rolled, hot dip coated and get back to you soon.
ASTM A108 Carbon and Alloy Steel Bars
ASTM A479 Stainless Steel
ASTM A53 Carbon Steel Pipes
ASTM A564 Stainless Steel Age Hardened
Cold Rolled Steels
Electrical Steel: Properties, Types, Production, and Applications
Hot Rolled Steels
Introduction to Steel Grades
Maraging Steel: Properties, Processing, and Applications
Materials Used in Bridges
What is ASTM A36?
What is ASTM A53?
What is the Coefficient of Thermal Expansion?
Young's Modulus: Definition, Measurement, and Typical Values
Do you supply similar materials?
List your company on Matmatch now and reach engineers around the world looking for such materials.Request more information
Elongation A80, transverse
Show Material materials with Elongation A80, transverse of 32 %
Tensile strength, transverse
340 - 410 MPa
Show Material materials with Tensile strength, transverse of 340 - 410 MPa
Yield strength Rp0.2, transverse
220 - 280 MPa
Show Material materials with Yield strength Rp0.2, transverse of 220 - 280 MPa
Show Material materials with Aluminium of 0.02 %
Show Material materials with Carbon of 0.01 %
Show Material materials with Manganese of 0.9 %
Show Material materials with Phosphorus of 0.08 %
Show Material materials with Silicon of 0.1 %
Show Material materials with Sulfur of 0.025 %
Show Material materials with Titanium of 0.12 %
+49 89 262075200
Leopoldstraße 250 A, 80807 Munich
© 2021 Matmatch GmbH, All rights reserved.
Made with ♥ in Munich!