EN 1652 Grade Cu-OF H065

Want to keep this datasheet? Save it now in your required format


The mark Cu-OF, mat. No CW008A, is a copper free of oxygen and deoxidation agents. To the comparable DIN-mark OFCu, mat. No 2.0040 acc. to DIN 1787 : 1973-01 applies: The material is hydrogen resistant and shows very high thermal and electrical conductivity. Tensile strength and Brinell hardness are increasable by cold forming. Processing properties: hot forming: very good cold forming: very good machinability: unfavorable hard soldering: good soft soldering: very good gas-shielded welding: good burnishing: very good Application: Preferred application in electrical engineering, electronics, vacuum technology as well as for production of all types of semifinished parts when highest electrical conductivity is required. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





20.0 °C

8.9 - 8.94 g/cm³

Show Material materials with Density of 8.9 - 8.94 g/cm³



Elastic modulus

20.0 °C

127 GPa

Show Material materials with Elastic modulus of 127 GPa

Hardness, Brinell

20.0 °C

60 - 95 [-]

Show Material materials with Hardness, Brinell of 60 - 95 [-]

Hardness, Vickers

20.0 °C

65 - 100 [-]

Show Material materials with Hardness, Vickers of 65 - 100 [-]

Poisson's ratio

20.0 °C

0.34 [-]

Show Material materials with Poisson's ratio of 0.34 [-]

Shear modulus

23.0 °C

48 GPa

Show Material materials with Shear modulus of 48 GPa

Typical for Wrought Copper Pure / Low Alloyed Copper



Coefficient of thermal expansion

23.0 °C

1.6E-5 - 1.8E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.6E-5 - 1.8E-5 1/K

Typical for Wrought Copper Pure / Low Alloyed Copper

Melting point

965 - 1100 °C

Show Material materials with Melting point of 965 - 1100 °C

Typical for Wrought Copper Pure / Low Alloyed Copper

Specific heat capacity

20.0 °C

385 J/(kg·K)

Show Material materials with Specific heat capacity of 385 J/(kg·K)

Thermal conductivity

20.0 °C

393 - 394 W/(m·K)

Show Material materials with Thermal conductivity of 393 - 394 W/(m·K)



Electrical conductivity

20.0 °C

5.80E+7 S/m

Show Material materials with Electrical conductivity of 5.80E+7 S/m

Electrical resistivity

20.0 °C

1.7E-8 Ω·m

Show Material materials with Electrical resistivity of 1.7E-8 Ω·m

Chemical properties



5E-4 %

Show Material materials with Bismuth of 5E-4 %


99.95 %

Show Material materials with Copper of 99.95 %


5E-3 %

Show Material materials with Lead of 5E-3 %