AA Standards Grade 5052 H322

Want to keep this datasheet? Save it now in your required format

Description

Aluminum AA 5052 is a non-heat treatable alloy with excellent finishing qualities. AA 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the best welding characteristics of all aluminum alloys.

Related Standards

Equivalent Materials

This material data has been provided by AluKey,MakeItFrom.com.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated Standards

Density

2.68 g/cm³

Show Material materials with Density of 2.68 g/cm³

H322

AA Standards, ASTM B209

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

H322

Mechanical

PropertyValueConditionRelated StandardsComment

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H322

AA Standards, ASTM B209

Elongation

9.0 %

Show Material materials with Elongation of 9.0 %

H322

AA Standards, ASTM B209

A50

7.0 %

Show Material materials with Elongation of 7.0 %

H322

AA Standards, ASTM B209

A50

5.0 %

Show Material materials with Elongation of 5.0 %

H322

AA Standards, ASTM B209

A50

5.8 %

Show Material materials with Elongation of 5.8 %

H322

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

26.0 - 26.5 GPa

Show Material materials with Shear modulus of 26.0 - 26.5 GPa

Typical for Wrought 5000 Series Aluminium

Tensile strength

215.0 - 240.0 MPa

Show Material materials with Tensile strength of 215.0 - 240.0 MPa

H322

AA Standards, ASTM B209

230.0 MPa

Show Material materials with Tensile strength of 230.0 MPa

H322

Yield strength

145.0 MPa

Show Material materials with Yield strength of 145.0 MPa

H322

AA Standards, ASTM B209

RP02

170.0 MPa

Show Material materials with Yield strength of 170.0 MPa

H322

Thermal

PropertyTemperatureValueConditionRelated StandardsComment

Coefficient of thermal expansion

2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K

H322

100 °C, 20 °C

2.38e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K

H322

AA Standards, ASTM B209

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

605.0 - 650.0 °C

Show Material materials with Melting point of 605.0 - 650.0 °C

H322

AA Standards, ASTM B209

610.0 °C

Show Material materials with Melting point of 610.0 °C

H322

Specific heat capacity

900.0 J/(kg·K)

Show Material materials with Specific heat capacity of 900.0 J/(kg·K)

H322

Thermal conductivity

138 W/(m·K)

Show Material materials with Thermal conductivity of 138 W/(m·K)

H322

AA Standards, ASTM B209

140.0 W/(m·K)

Show Material materials with Thermal conductivity of 140.0 W/(m·K)

H322

Electrical

PropertyValueConditionRelated Standards

Electrical conductivity

20000000.0 S/m

Show Material materials with Electrical conductivity of 20000000.0 S/m

H322

AA Standards, ASTM B209

Electrical resistivity

5e-08 Ω·m

Show Material materials with Electrical resistivity of 5e-08 Ω·m

H322

AA Standards, ASTM B209

Chemical properties

PropertyValueConditionRelated Standards

Aluminium

95.8 - 97.7 %

Show Material materials with Aluminium of 95.8 - 97.7 %

H322

Chromium

0.15 - 0.35 %

Show Material materials with Chromium of 0.15 - 0.35 %

H322

AA Standards, ASTM B209

Copper

0.1 %

Show Material materials with Copper of 0.1 %

H322

AA Standards, ASTM B209

Iron

0.40 %

Show Material materials with Iron of 0.40 %

H322

AA Standards, ASTM B209

0.4 %

Show Material materials with Iron of 0.4 %

H322

Magnesium

2.2 - 2.8 %

Show Material materials with Magnesium of 2.2 - 2.8 %

H322

AA Standards, ASTM B209

Manganese

0.1 %

Show Material materials with Manganese of 0.1 %

H322

AA Standards, ASTM B209

Other

0.15 %

Show Material materials with Other of 0.15 %

H322

Silicon

0.25 %

Show Material materials with Silicon of 0.25 %

H322

AA Standards, ASTM B209

Zinc

0.1 %

Show Material materials with Zinc of 0.1 %

H322

AA Standards, ASTM B209

Technological properties

Property
Brazing

general: limited brazing

Corrosion properties

Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere

General machinability

General: poor (O, H32), sufficient (H34, H36, H38)

Workability

general (condition): good (O), acceptable (H32, H34), poor(H36, H38)