Show me around

AA Standards Grade 5086 O

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where AA Standards Grade 5086 O falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.66 - 2.7 g/cm³ at 20 °C

Dimension

Dimensions

Wanddicke

Mechanical

Compressive modulus

Ecomp

72.4 MPa at 20 °C

Elastic modulus

E

71 GPa at 20 °C

Elongation

A

46 % at -195 °C

Elongation in 50 mm

Hide chart

Elongation A100

A100

12 - 14 % at 20 °C

Elongation A50

A50

14 - 22 % at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Typical for Wrought 5000 Series Aluminium

Shear modulus

G

26.4 GPa at 20 °C

Shear strength

τ

160 MPa at 20 °C

Tensile strength

Rm

380 MPa at -195 °C

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

Unlock all property charts

Yield strength

YS

110 MPa at 20 °C

Yield strength Rp0.2

Rp0.2

131 MPa at -196 °C

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

Unlock all property charts

Thermal

Coefficient of thermal expansion

α

2.38E-5 - 2.4E-5 1/K at 20 °C

Unlock all property charts

Max service temperature

Tmax

150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

Tm

585 - 640 °C

Specific heat capacity

cp

900 J/(kg·K) at 20 °C

Thermal conductivity

λ

126 - 130 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

1.80E+7 - 1.80E+8 S/m at 20 °C

Electrical resistivity

ρel

5.56E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Al

93 - 96.3 %

Mg

3.5 - 4.5 %

Mn

0.2 - 0.7 %

Cr

0.05 - 0.25 %

Cu

0 - 0.1 %

More

Technological properties

Brazing

general: no brazing is known or developed

Corrosion properties

Stress corrosion cracking: no damage during operation and laboratory tests (O, H32, H116, H111), no damage during operation, limited damage during laboratory tests (H34, H36, H38), general: very good, without protection in industrial or seawater atmosphere

General machinability

General: poor (O, H32, H116, H111), sufficient (H34, H36, H38)

Workability

general (condition): good (O), acceptable (H32, H116, H111), poor(H36, H38)

This material data has been provided by MakeItFrom.com,ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.