The material: 'RADILON A RV500RW 339 BK' you were looking for has been superseded by the one below.

RADILON A RV500RW 339 BK

Alternative and trade names
PA66-GF50
Want to keep this datasheet? Save it now in your required format

Description

PA66 50% glass fibre reinforced injection moulding grade. Heat stabilized. Deep black colour.

Suitable for technical parts requiring very high stiffness and high mechanical resistance. Excellent heat ageing properties retention, improved welding lines strength. Especially fit for demanding metal replacement applications.

Equivalent Materials

This material data has been provided by Radici Group.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionTesting StandardThicknessComment

Density

1.58 g/cm³

Show Supplier Material materials with Density of 1.58 g/cm³

dry

ISO 1183

Moisture absorption

23 °C

1.1 %

Show Supplier Material materials with Moisture absorption of 1.1 %

50%RH

ISO 62

2 mm

Water absorption

4 %

Show Supplier Material materials with Water absorption of 4 %

ISO 62

2 mm

immersion at 23°C

Mechanical

PropertyTemperatureValueConditionTesting StandardComment

Elastic modulus

14.2 GPa

Show Supplier Material materials with Elastic modulus of 14.2 GPa

50%RH

ISO 527-2/1A

1mm/min

17 GPa

Show Supplier Material materials with Elastic modulus of 17 GPa

dry

ISO 527-2/1A

1mm/min

Elongation

3 %

Show Supplier Material materials with Elongation of 3 %

dry

ISO 527-2/1A

5mm/min

3.1 %

Show Supplier Material materials with Elongation of 3.1 %

50%RH

ISO 527-2/1A

5mm/min

Flexural modulus

15.4 GPa

Show Supplier Material materials with Flexural modulus of 15.4 GPa

50%RH

ISO 178

2mm/min

15.5 GPa

Show Supplier Material materials with Flexural modulus of 15.5 GPa

dry

ISO 178

2mm/min

Flexural strength

305 MPa

Show Supplier Material materials with Flexural strength of 305 MPa

50%RH

ISO 178

2mm/min

375 MPa

Show Supplier Material materials with Flexural strength of 375 MPa

dry

ISO 178

2mm/min

Impact strength, Charpy notched

-30 °C

16 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 16 kJ/m²

dry

ISO 179/1eA

23 °C

18 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 18 kJ/m²

dry

ISO 179/1eA

23 °C

25 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 25 kJ/m²

50%RH

ISO 179/1eA

Impact strength, Charpy unnotched

-30 °C

102 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 102 kJ/m²

dry

ISO 179/1eU

23 °C

100 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 100 kJ/m²

dry

ISO 179/1eU

23 °C

112 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 112 kJ/m²

50%RH

ISO 179/1eU

Tensile strength

190 MPa

Show Supplier Material materials with Tensile strength of 190 MPa

50%RH

ISO 527-2/1A

5mm/min

245 MPa

Show Supplier Material materials with Tensile strength of 245 MPa

dry

ISO 527-2/1A

5mm/min

Thermal

PropertyTemperatureValueTesting StandardThicknessComment

Coefficient of thermal expansion

1.5e-05 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 1.5e-05 1/K

ISO 11359-1/-2

23°C-55°C

8.5e-05 1/K

Show Supplier Material materials with Coefficient of thermal expansion of 8.5e-05 1/K

ISO 11359-1/-2

23°C-55°C, Transverse

Glow Wire Flammability Index

700 °C

Show Supplier Material materials with Glow Wire Flammability Index of 700 °C

IEC 60695-2-12

1 mm, 2 mm

Glow Wire Ignition Temperature

725 °C

Show Supplier Material materials with Glow Wire Ignition Temperature of 725 °C

IEC 60695-2-13

1 mm, 2 mm

Heat deflection temperature

215 °C

Show Supplier Material materials with Heat deflection temperature of 215 °C

ISO 75/2Af

8.00 MPa

250 °C

Show Supplier Material materials with Heat deflection temperature of 250 °C

ISO 75/2Af

1.80 MPa

Melting point

260 °C

Show Supplier Material materials with Melting point of 260 °C

ISO 11357-1/-3

10°C/min

Thermal conductivity

23 °C

0.37 W/(m·K)

Show Supplier Material materials with Thermal conductivity of 0.37 W/(m·K)

Vicat softening temperature

255 °C

Show Supplier Material materials with Vicat softening temperature of 255 °C

ISO 306

50°C/h 50N

Rheological Properties

PropertyValueTesting StandardConditionComment

Melt mass-flow rate

8.2 g/10min

Show Supplier Material materials with Melt mass-flow rate of 8.2 g/10min

ISO 1133

275°C/5Kg

Shrinkage

0.2 %

Show Supplier Material materials with Shrinkage of 0.2 %

ISO 294-4

300/90/60*

*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]

0.7 %

Show Supplier Material materials with Shrinkage of 0.7 %

ISO 294-4

300/90/60*

*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse

Viscosity number

152 cm³/gr

Show Supplier Material materials with Viscosity number of 152 cm³/gr

ISO 307

Sulfuric acid

Technological properties

Property
Additives

Release agent

Certifications

RoHS 2011/65/UE

Color

Deep black

Features

Heat Stabilized

Fillers

50% Glass Fiber

Processing methods

Injection Molding