NORYL™ Resin ER006987 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ ER006987 resin is a 30% glass reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is pending. NORYL ER006987 resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves.

This material data has been provided by Sabic.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.3 g/cm³

Show Supplier Material materials with Density of 1.3 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

9.48 GPa

Show Supplier Material materials with Elastic modulus of 9.48 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

2.4 %

Show Supplier Material materials with Elongation of 2.4 %

ISO 527 | break, 5 mm/min

Flexural modulus

23.0 °C

8.44 GPa

Show Supplier Material materials with Flexural modulus of 8.44 GPa

ISO 178 | 2 mm/min

Flexural strength

23.0 °C

200 MPa

Show Supplier Material materials with Flexural strength of 200 MPa

ISO 178 | break, 2 mm/min

Impact strength, Charpy notched

23.0 °C

12 kJ/m²

Show Supplier Material materials with Impact strength, Charpy notched of 12 kJ/m²

ISO 179/1eA | V-notch Edgew, 23°C, 80*10*4 sp=62mm

Impact strength, Charpy unnotched

23.0 °C

50 kJ/m²

Show Supplier Material materials with Impact strength, Charpy unnotched of 50 kJ/m²

ISO 179/1eU | Unnotch Edgew 80*10*4 sp=62mm, -30°C

Impact strength, Izod notched

23.0 °C

12 kJ/m²

Show Supplier Material materials with Impact strength, Izod notched of 12 kJ/m²

ISO 180/1A | 80*10*4, 23°C

Impact strength, Izod notched, ASTM

23.0 °C

85 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 85 J/m

ASTM D 256 | notched, -30°C

Impact strength, Izod unnotched

23.0 °C

45 kJ/m²

Show Supplier Material materials with Impact strength, Izod unnotched of 45 kJ/m²

ISO 180/1U | unnotched 80*10*4, -30°C

Impact strength, Izod unnotched, ASTM

23.0 °C

550 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 550 J/m

ASTM D 4812 | unnotched, -30°C

Tensile strength

23.0 °C

131 MPa

Show Supplier Material materials with Tensile strength of 131 MPa

ISO 527 | break, 5 mm/min

Thermal

PropertyValueComment

Glow Wire Flammability Index

775 °C

Show Supplier Material materials with Glow Wire Flammability Index of 775 °C

Glow Wire Ignition Temperature

800 °C

Show Supplier Material materials with Glow Wire Ignition Temperature of 800 °C

IEC 60695-2-13 | 3.0 mm

Heat deflection temperature

149 - 155 °C

Show Supplier Material materials with Heat deflection temperature of 149 - 155 °C

Heat deflection temperature, 0.45 MPa

155 °C

Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 155 °C

ISO 75/Be | Edgew 120*10*4 sp=100mm

Heat deflection temperature, 1.80 MPa

149 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 149 °C

ISO 75/Ae | Edgew 120*10*4 sp=100mm

Vicat softening temperature

167 °C

Show Supplier Material materials with Vicat softening temperature of 167 °C

ISO 306 | Rate A/120

Flammability

Glow Wire Ignitability Temperature, 1.5 mm: 825°C IEC 60695-2-13 <br> Glow Wire Flammability Index, 1.5 mm: 825°C IEC 60695-2-12

Rheological Properties

PropertyValueComment

Melt mass-flow rate

30 g/10min

Show Supplier Material materials with Melt mass-flow rate of 30 g/10min

ASTM D 1238 | 300°C/10 kgf

Melt volume-flow rate

26 cm³/10min

Show Supplier Material materials with Melt volume-flow rate of 26 cm³/10min

ISO 1133 | MVR at 300°C/10.0 kg

Technological properties

Property
Application areas

Hydroblocks

Availability

Europe

Processing methods

Drying Temperature: 100 to 120.0°C
Drying Time: 2 to 4.0hrs
Maximum Moisture Content: 0.02%
Melt Temperature: 290 to 320.0°C
Nozzle Temperature: 290 to 320.0°C
Front - Zone 3 Temperature: 300 to 310.0°C
Middle - Zone 2 Temperature: 280 to 300.0°C
Rear - Zone 1 Temperature: 270 to 280.0°C
Hopper Temperature: 60 to 80.0°C
Mold Temperature: 80 to 120.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.