Dimension
Property | Value |
---|---|
Diameter | 130 - 304.8 mm Show Supplier Material materials with Diameter of 130 - 304.8 mm |
Mechanical
Property | Temperature | Value |
---|---|---|
Charpy impact energy, V-notch | -32.0 °C | 42 J Show Supplier Material materials with Charpy impact energy, V-notch of 42 J |
Elongation | 23.0 °C | 17 - 18 % Show Supplier Material materials with Elongation of 17 - 18 % |
Hardness, Rockwell C | 23.0 °C | 22 [-] Show Supplier Material materials with Hardness, Rockwell C of 22 [-] |
Tensile strength | 23.0 °C | 585 - 655 MPa Show Supplier Material materials with Tensile strength of 585 - 655 MPa |
Yield strength Rp0.2 | 23.0 °C | 414 - 517 MPa Show Supplier Material materials with Yield strength Rp0.2 of 414 - 517 MPa |
Chemical properties
Property | Value |
---|---|
Carbon | 0.28 - 0.33 % Show Supplier Material materials with Carbon of 0.28 - 0.33 % |
Chromium | 0.8 - 1.1 % Show Supplier Material materials with Chromium of 0.8 - 1.1 % |
Iron | Balance |
Manganese | 0.4 - 0.6 % Show Supplier Material materials with Manganese of 0.4 - 0.6 % |
Molybdenum | 0.15 - 0.25 % Show Supplier Material materials with Molybdenum of 0.15 - 0.25 % |
Phosphorus | 0.03 % Show Supplier Material materials with Phosphorus of 0.03 % |
Silicon | 0.15 - 0.35 % Show Supplier Material materials with Silicon of 0.15 - 0.35 % |
Sulfur | 0.035 % Show Supplier Material materials with Sulfur of 0.035 % |
Technological properties
Property | ||
---|---|---|
Application areas | AISI 4130 is a low alloyed hardened and tempered steel used for Oil and gas drilling and production equipment – wellhead and Christmas tree equipment. | |
Heat Treatment | Hardened at 860°C followed by water quenching. Tempering at min. 650°C, cooled in air. | |
Welding | Good. |