The material: 'Acrylonitrile Butadiene Styrene (ABS) for Injection Molding' you were looking for has been superseded by the one below.

ABS 19 black HAKAran

Alternative and trade names
HAKAran ABS 19 schwarz

Want to keep this datasheet? Save it now in your required format

Description

ABS, standard viscosity, black. Granulate contains recycled polymers coming from injection molding applications.

This material data has been provided by Aurora Kunststoffe GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	20.0 °C	1.02 - 1.06 g/cm³ Show Supplier Material materials with Density of 1.02 - 1.06 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	20.0 °C	2 - 2.4 GPa Show Supplier Material materials with Elastic modulus of 2 - 2.4 GPa	ISO 527-2
Elongation	20.0 °C	9 - 11 % Show Supplier Material materials with Elongation of 9 - 11 %	ISO 527-1/-2
Impact strength, Charpy notched	20.0 °C	16 - 24 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 16 - 24 kJ/m²	ISO 179/1eA
Impact strength, Charpy unnotched	20.0 °C	150 - 190 kJ/m² Show Supplier Material materials with Impact strength, Charpy unnotched of 150 - 190 kJ/m²	ISO 179/1eA
Tensile strength	20.0 °C	35 - 45 MPa Show Supplier Material materials with Tensile strength of 35 - 45 MPa	ISO 527-1/-2

Thermal

Property	Temperature	Value	Comment
Ash content	20.0 °C	2 % Show Supplier Material materials with Ash content of 2 %	Maximum

Rheological Properties

Property	Value	Comment
Melt volume-flow rate	14 - 24 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 14 - 24 cm³/10min	ISO 1133, 220°C/10Kg

Technological properties

Property
Application areas	House trunks, Industrial trunks, Car interior cases, Seating
Processing methods	Pre-drying 2-4 hours/79°C

The material: 'Acrylonitrile Butadiene Styrene (ABS) for Injection Molding' you were looking for has been superseded by the one below.

ABS 19 black HAKAran

Description

Ashby charts

Applications

Materials by this supplier

Properties