EN 573-3 Grade AW-5010 F

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMg alloy. The alloy is not food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

F

EN 573-3

Flat

2.71 g/cm³

Show Material materials with Density of 2.71 g/cm³

F

EN 573-3, EN 485

Strip, Sheet, Plate

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

69.0 - 70.0 GPa

Show Material materials with Elastic modulus of 69.0 - 70.0 GPa

Typical for Wrought 5000 Series Aluminium

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

20.0 °C

27.0

Show Material materials with Shear modulus of 27.0

F

EN 573-3

Flat

Tensile strength

20.0 °C

90.0 MPa

Show Material materials with Tensile strength of 90.0 MPa

F

EN 573-3

Flat

Transverse

90.0 MPa

Show Material materials with Tensile strength of 90.0 MPa

F

EN 573-3, EN 485

Strip, Sheet, Plate

20.0 °C

90.0 MPa

Show Material materials with Tensile strength of 90.0 MPa

F

EN 573-3

Flat

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

2.2e-05 - 2.5e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.2e-05 - 2.5e-05 1/K

Typical for Wrought 5000 Series Aluminium

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

560.0 - 655.0 °C

Show Material materials with Melting point of 560.0 - 655.0 °C

Typical for Wrought 5000 Series Aluminium

Specific heat capacity

879.0 - 963.0 J/(kg·K)

Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K)

Typical for Wrought 5000 Series Aluminium

Thermal conductivity

20.0 °C

215.0 W/(m·K)

Show Material materials with Thermal conductivity of 215.0 W/(m·K)

F

EN 573-3

Flat

Electrical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Electrical conductivity

20.0 °C

35000000.0

Show Material materials with Electrical conductivity of 35000000.0

F

EN 573-3

Flat

Electrical resistivity

3.3e-08 - 5e-08 Ω·m

Show Material materials with Electrical resistivity of 3.3e-08 - 5e-08 Ω·m

Typical for Wrought 5000 Series Aluminium

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.15 %

Show Material materials with Chromium of 0.15 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Copper

0.25 %

Show Material materials with Copper of 0.25 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Iron

0.7 %

Show Material materials with Iron of 0.7 %

F

EN 573-3

Flat

0.70 %

Show Material materials with Iron of 0.70 %

F

EN 573-3, EN 485

Strip, Sheet, Plate

Magnesium

0.2 - 0.6 %

Show Material materials with Magnesium of 0.2 - 0.6 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Manganese

0.1 - 0.3 %

Show Material materials with Manganese of 0.1 - 0.3 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Silicon

0.4 %

Show Material materials with Silicon of 0.4 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Zinc

0.3 %

Show Material materials with Zinc of 0.3 %

F

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Technological properties

Property
Workability

Good workability.