Which Metals Are Commonly Used for Surgical Instruments?

By
MD
Marta Danylenko
on April 6, 2018

There are many different considerations when choosing a material to use in the medical industry. After all, the wrong material choice could lead to disastrous consequences. In this article, we take a look at which metals are used for surgical instruments, and why.

The most common metals used for surgical instruments are:

  • Stainless steel
  • Titanium
  • Tantalum
  • Platinium
  • Palladium

Read on to learn why these metals were chosen. The metals used for surgical instruments have to adhere to strict criteria.

Mechanical Properties

We know that different metals have very different properties. Finding the best properties to suit the needs of each type of surgical equipment is vital. Some of the issue to consider include:-

Ductility and malleability

The metal must be relatively malleable so it can be shaped without causing flaws. However, it must not be too malleable as it will need to hold its shape once manufactured. Depending on the instrument/application, the metal used may also need to be fairly ductile. Many surgical instruments are long and thin, e.g. scalpels, forceps, scissors, etc. They should not break off during the operation. The lowest modulus required for surgical instruments is 100GPa.

Ability to withstand high temperatures

Surgical instruments are subjected to elevated temperatures during the sterilisation process. The instruments are sterilised by scolding hot steam at a minimum of 121 degree Celsius temperature for at least 30 minutes. There should be minimum dimensional change in the instrument after repeated sterilisations.

Wear and tear

Surgeons require instruments that perform correctly every time they are used. Wear and tear affects surgical instruments as after a certain usage they will not perform as required. For example scissors may become blunt and not cut tissue easily.

Resistance to corrosion

Surgical instruments are increasingly exposed to bodily fluids, tap water and cleansers. Bodily fluids such as blood or pus generally contain chloride ions, which can corrode the instruments. They are also washed under the tap water to remove bodily fluids from them. The water may contain high concentration of minerals such as chlorine, sodium and magnesium. These can cause severe stains and corrosion if left to sit on the instruments. Hospitals generally use distilled water to partly eliminate the problem.

Various cleansers are used to clean the instruments from bacteria and infections. They could be either an alkaline solution or an acidic solutions with varying pH. This acidic/alkaline solutions may, over time, corrode the surgical instruments.

Biocompatibility

In simple terms, biocompatibility is a material’s compatibility with living tissue. Biocompatible materials do not produce a toxic or immunological response when exposed to the body or bodily fluids. Elements such as nickel, chromium, and cobalt are likely to cause allergic and tissue hypersensitivity problems.

Magnetic Properties

Surgical instruments are sometimes subjected to a magnetic field in the operating room such as a from an MRI, which generates a magnetic field of ~1.5 Tesla. This magnetic field can affect surgical instruments in numerous ways including:-

  • Unwanted movement caused by the magnetic field interactions (i.e. the missile effect)
  • Heating of instruments because of radio frequency (RF) power deposition
  • Artifacts associated with the use of the instrument

Non-magnetic instruments such as stainless steel, titanium alloys etc are recommended in such environments.

Glare

By anodizing the surgical instruments, manufacturers change the surface properties of the metal. This makes the surgical instruments non-reflective. When the surgeon/lab operators are working under operating lights or a microscope, an anti-glare surface is important.

Ergonomics

Lightweight surgical instrument are simply easier to handle, especially during long surgical procedures, dissections or when performing repetitive tasks. This means that titanium surgical tools are more suitable than their stainless steel counterparts.

When it comes to biomedical instruments, not all metals are up to the job, especially base metals. In fact, most surgical instruments are made from metal alloys. Stainless steel has traditionally been the metal alloy of choice, but there are alternatives when necessary.

metals used in surgical instruments

Stainless steel grades for surgical instruments

Stainless steel (sometimes referred to as inox steel) is one of the most commonly used metal alloys in the manufacture of surgical implements.

Austenitic 316 steel is a type of stainless steel used often, and is referred to as “surgical steel”. This is because it is a tough metal that is very resistant to corrosion. It is also used frequently in the chemical industry.

AISI 301 is the most commonly used metal for manufacturing springs which are useful in medical instruments. It gains mechanical strength when cold-worked, but loses corrosion resistance.

Stainless steel can withstand temperatures as high as 400°C, meaning it can be sterilised easily in an autoclave at 180°C. It also has the benefit of being almost as tough and hard-wearing as carbon steel.

Interested in stainless steel? Then read this article – everything about stainless steel, its composition, categories, and applications.

Titanium in surgical tools

Titanium alloy has only recently started being used as a material for surgical instruments, taking off in the 1960s.

The most obvious benefit of titanium is its superior strength. Its tensile strength is almost the same as carbon steel and it is 100% corrosion resistant. Despite its overall strength, it is more flexible than stainless steel and is approximately 40% lighter.

Read more about technologies and materials enabling surgical tools and biomedical implants. The article is written by an expert in the field – the Doctor of Medicine, Hugo Herrero Antón de Vez. 

Titanium is perfect for both surgical instruments and implants, as it is biocompatible and has the intrinsic quality that it fuses well with human bones. For this reason, it has become the metal of choice for orthopaedic rods, pins, plates, and dental implants.

Titanium is more resistant to heat than stainless steel, withstanding up to 430°C, and it expands and contracts less when heated and cooled.

Depending on the properties required for the instrument, Titanium Grade 1 or 2 can be machined, welded, and hot or cold-worked quite easily, so it is a versatile metal too.

Overall, titanium is a tough, durable metal that has become a common material used for all kinds of medical purposes.

https://youtu.be/G5qmIxssmQw

Tantalum in orthopaedics 

Tantalum, a refractory metal, is strong, ductile and has a very high melting point (3017°C). But for the medical industry, its most attractive benefit is its high biocompatibility.

The metal is immune to bodily fluids, and is also highly corrosion-resistant, so it can be used in surgery without causing adverse effects. For the same reasons, it’s also used for implants and bone replacement material in prostheses.

Its ductility is also an attractive property, as it can be drawn into thin wire, while its malleability allows it to be easily fabricated into various shapes.

metals surgical instruments

Platinum and palladium in medicine

Although platinum and palladium are expensive precious metals, they have similar properties that make them uniquely suited to certain surgical applications.

Firstly, they can both be easily formed into a variety of shapes as they are highly malleable and ductile, meaning you can easily make rolls, sheets, tubes, wires, etc. They are especially useful for intricate parts, ideal for precision surgical instruments.

Both platinum and palladium are highly corrosion resistant and inert, so they won’t cause problems when in contact with the body or internal organs.

One of the major uses in recent years has been creating ultra-thin wires that surgeons use to guide and position implants such as catheters and stents.

Another advantage is that both platinum and palladium show up very clearly on X-ray making them ideal to be used as markers on implants.

They are both strong, durable metals. The only real differences between the two are density, mass, melting points, and price, with palladium being the cheaper of the two.

Aluminium for parts and cases

Certain instrument parts and cases are manufactured from aluminium, which is lightweight. Aluminium is treated with an electrochemical process called anodization which forms an oxide layer on the surface of the aluminium. The oxide layer offers great corrosion resistance. Certain cleaners, disinfectant solutions and abrasive brushes can damage the protective layer.

Tungsten Carbide

Tungsten carbide (TC) is classed as a carbide, which you’ll find in the overall group of ceramics, but we thought it worth a mention in this article too. It is composed of tungsten and carbon atoms, and is used in the manufacture of various instruments. These include:

  • Needle holders
  • Scissors
  • Pin cutters
  • Pliers
  • Wire tighteners

Since tungsten carbide is harder than steel, it offers exceptional durability. Usually, the TC is soldered or welded to the jaws/working ends of instruments. TC inserts that are soldered can be separated from the instrument and replaced.

Surgical instrument metals

Hopefully, this article has given you some idea of the different types of metal used to make surgical instruments and their properties.

As you have seen, the different varieties of stainless steel are the most popular as they are relatively cheap, plentiful, and practical for most applications.

Titanium is the next most common, as it has additional strength and is ideal for orthopaedic implants due to the fact it fuses easily with bone.

Tantalum’s properties make it an ideal choice to use in surgical instruments.

Finally, there are the precious metals, platinum, and palladium. These are the most expensive, which is why they are rarely used in a medical setting, but they are ideal for small, precision implements and parts.

Matmatch Blog
  • John Stokes
    John Stokes
    May 3rd 2018 at 6:36 am

    Thanks for sharing all the insight about commonly used surgical instruments. Not everything always goes according to plan. I think that’s fine as long as the product comes out according to how it was planned to be like.

  • Marc Johnsson
    Marc Johnsson
    May 17th 2018 at 11:16 am

    Im with you John.

  • Jasmine Paulos
    Jasmine Paulos
    Jul 14th 2018 at 2:03 pm

    Corrosion is a very harmful in case metals and specially in case of medical instrument.This metals which you listed are corrosion free and are very safe for the medical purpose.Thanks for sharing such amazing article.

  • Exponiq Surgical
    Exponiq Surgical
    Aug 29th 2018 at 9:41 am

    Much obliged for sharing all the knowledge about normally utilized careful instruments.

  • Bo
    Bo
    Oct 6th 2018 at 1:46 am

    How is difference between forceps and scissors about materials made them?

  • Ashu Mishra
    Ashu Mishra
    May 18th 2019 at 2:15 pm

    Structural steels are the steel frames or products used for preparing any type of construction related project.

  • Raj Chandra
    Raj Chandra
    Dec 3rd 2019 at 11:59 am

    Thank you so much for your information on surgical instruments, it’s quite appealing interesting and impressive as well. There is one company in the USA who supplies quite a good quality of surgical instruments.

  • Rahul Singh
    Rahul Singh
    Oct 2nd 2020 at 2:01 pm

    Thank you for sharing, these metals are making the different surgical instruments.

  • Manufacturer of Surgical Instruments
    Manufacturer of Surgical Instruments
    Jun 30th 2022 at 11:39 am

    Surgical instruments are a useful tool in the healing process.

Leave a Reply to Marc Johnsson Cancel reply

Your email address will not be published. Required fields are marked *