Making effective reuse of waste plastics…
Recycling and reusing waste products has been high on the agenda for people across the world for the past 20 years, with it climbing ever higher up the list in recent years.
Here I explain how one of our partner suppliers WELA Plast is incorporating recycling into its materials, and how design engineers can use it to design greener projects.
If you’ve been through the fruit and vegetable aisle in a supermarket in the past few years, you’ll have probably come across ‘wonky’ produce. These are fruits and vegetables that don’t meet the conventional size or shape requirements of producers. In the past, such produce was often discarded on the basis of being unprofitable, but as awareness of food waste has grown, wonky produce has grown in popularity.
We can think of wonky produce as symbolic of the shift in society towards a less wasteful, more resourceful economy.
Recycling plastic products…
We’re seeing a similar mentality shift in the materials industry, not least of all for plastics. Plastic products have been widely manufactured and used for the past half a century and most of this plastic is still around today, albeit not in a way that is providing value to people. A team of scientists analysed production data and concluded that 91 per cent of plastics are not recycled. And if you take a swim at the beach, you’ll see evidence of this — plastic litter is everywhere.
However, the recycling of plastic products at the point of use is only part of the solution. During the plastic production process and product manufacturing, waste material is usually produced due to the subtractive manufacturing process that many manufacturers use. Often, this scrap material is not considered to be useful and it becomes waste.
As a materials sourcing platform and database, we at Matmatch strive to help design engineers choose the ideal materials for their projects, whether that is based on its impact strength, density or sustainability. So, we’re always keen on highlighting the green credentials of our suppliers. And in tackling plastic waste in manufacturing, WELA-Plast is producing high-quality thermoplastics from the waste of manufacturers.
Transforming waste into a new raw material
WELA Plast uses the production waste and faulty batches from manufacturers, as well as overproduction from plastic-processing companies and commercial waste recycled granulates, to produce a multitude of plastics ideal for extrusion, injection moulding and film applications. These plastics include high-density polyethylene (HDPE), low-density PE (LDPE), polystyrene, acrylonitrile butadiene styrene (ABS) and polypropylene (PP).
Crucially, there is little difference between the properties of these recycled materials and newly created plastics. As such, it’s more environmentally-friendly to use these recycled materials, and as we’ve seen governments around the world introducing new ways of taxing manufacturers for the use and end-of-life management of plastic products, this can lead to lower overall costs.
Where to use recycled plastics?
If, for example, a design engineer is developing a new range of laser printers and is determining the material to use for the roller gears, using a recycled thermoplastic such as an ABS for injection moulding would offer the same application benefits — good natural lubricity, high heat resistance, durability — but in a more resourceful way.
It’s all about sustainability
It’s a seemingly simple step, but it’s one that takes us closer to the circular economy where nothing is wasted, only reprocessed and reused. A bit like buying wonky produce, choosing to source recycled materials is a decision that allows design engineers to get the same net result without the same environmental impact.
How the Lumber Shortage Is Affecting the Construction Industry
A significant demand surge, ongoing supply chain woes and the impact of…
Factors to Consider When Choosing Thermal Interface Materials
From consumer electronics to aerospace, all electronic devices require active thermal management…
What Are the Best Ways to Improve Your Machining Operation?
Machining is never a cheap process — it takes significant amounts of…
Tracking the Advances in the Conversion CO2 into Polymers
The chemical industry’s demand for carbon continues to grow, and so does…