Eigenschaften
Allgemein
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Dichte | 2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³ | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |
20.0 °C | 2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³ | H111 | EN 573-3 | Rod, Flat, Tube | |
20.0 °C | 2.68 - 2.69 g/cm³ Show Material materials with Dichte of 2.68 - 2.69 g/cm³ | H111 | EN 573-3 | Rod, Flat, Tube | |
20.0 °C | 2.69 g/cm³ Show Material materials with Dichte of 2.69 g/cm³ | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 573-3 | Coil, Sheet, Plate, Strip, Rod, Flat, Tube |
Abmessung
| Property | Value | Condition | Related Standards | Thickness | Shape |
|---|---|---|---|---|---|
Dicke | 0.2 mm Show Material materials with Dicke of 0.2 mm | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | 0.2 mm | Coil, Sheet, Plate, Strip |
6.0 mm Show Material materials with Dicke of 6.0 mm | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | 6.0 mm | Coil, Sheet, Plate, Strip |
Mechanisch
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Biegewinkel 180° | 0 °/t Show Material materials with Biegewinkel 180° of 0 °/t | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | ||
0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |||
0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |||
Biegewinkel 90° | 0 °/t Show Material materials with Biegewinkel 90° of 0 °/t | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | ||
0.5 °/t Show Material materials with Biegewinkel 90° of 0.5 °/t | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |||
1.0 °/t Show Material materials with Biegewinkel 90° of 1.0 °/t | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |||
2.0 °/t Show Material materials with Biegewinkel 90° of 2.0 °/t | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |||
2.0 °/t Show Material materials with Biegewinkel 90° of 2.0 °/t | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |||
Dehnung | 13.0 % Show Material materials with Dehnung of 13.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A50 | |
13.0 - 18.0 % Show Material materials with Dehnung of 13.0 - 18.0 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | A50 | ||
14.0 % Show Material materials with Dehnung of 14.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A50 | ||
15.0 % Show Material materials with Dehnung of 15.0 % | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A50 | ||
16.0 % Show Material materials with Dehnung of 16.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A50 | ||
17.0 % Show Material materials with Dehnung of 17.0 % | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A100 | ||
18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A50 | ||
18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | A100 | ||
20.0 °C | 13.0 % Show Material materials with Dehnung of 13.0 % | H111 | EN 573-3 | Flat | A50 | |
20.0 °C | 13.0 % Show Material materials with Dehnung of 13.0 % | H111 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 14.0 % Show Material materials with Dehnung of 14.0 % | H111 | EN 573-3 | Flat | A50 | |
20.0 °C | 14.0 % Show Material materials with Dehnung of 14.0 % | H111 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 15.0 % Show Material materials with Dehnung of 15.0 % | H111 | EN 573-3 | Rod, Tube | A50 | |
20.0 °C | 16.0 % Show Material materials with Dehnung of 16.0 % | H111 | EN 573-3 | Flat | A50 | |
20.0 °C | 16.0 % Show Material materials with Dehnung of 16.0 % | H111 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 17.0 % Show Material materials with Dehnung of 17.0 % | H111 | EN 573-3 | Rod, Tube | ||
20.0 °C | 18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3 | Flat | A50 | |
20.0 °C | 18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3 | Flat | ||
20.0 °C | 18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 18.0 % Show Material materials with Dehnung of 18.0 % | H111 | EN 573-3 | Flat | Transverse | |
Elastizitätsmodul | 68.6 GPa Show Material materials with Elastizitätsmodul of 68.6 GPa | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | ||
70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |||
20.0 °C | 70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa | H111 | EN 573-3 | Rod, Flat, Tube | ||
Härte, Brinell | 44.0 [-] Show Material materials with Härte, Brinell of 44.0 [-] | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | ||
20.0 °C | 44.0 [-] Show Material materials with Härte, Brinell of 44.0 [-] | H111 | EN 573-3 | Flat | ||
20.0 °C | 45.0 [-] Show Material materials with Härte, Brinell of 45.0 [-] | H111 | EN 573-3 | Rod, Tube | ||
Härte, HBW | 44 [-] Show Material materials with Härte, HBW of 44 [-] | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poissonzahl | 20.0 °C | 0.33 [-] Show Material materials with Poissonzahl of 0.33 [-] | H111 | EN 573-3 | Rod, Flat, Tube | |
Schubmodule | 26.3 GPa Show Material materials with Schubmodule of 26.3 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | ||
20.0 °C | 26.3 - 26.5 GPa Show Material materials with Schubmodule of 26.3 - 26.5 GPa | H111 | EN 573-3 | Rod, Flat, Tube | ||
20.0 °C | 26.3 GPa Show Material materials with Schubmodule of 26.3 GPa | H111 | EN 573-3 | Rod, Flat, Tube | ||
Streckgrenze | 60.0 MPa Show Material materials with Streckgrenze of 60.0 MPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | RP02 | |
60 MPa Show Material materials with Streckgrenze of 60 MPa | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |||
20.0 °C | 60.0 MPa Show Material materials with Streckgrenze of 60.0 MPa | H111 | EN 573-3 | Rod, Tube, Flat | RP02 | |
20.0 °C | 60.0 MPa Show Material materials with Streckgrenze of 60.0 MPa | H111 | EN 573-3 | Flat | RP02 Transverse | |
Zugfestigkeit | 20.0 °C | 150.0 - 200.0 MPa Show Material materials with Zugfestigkeit of 150.0 - 200.0 MPa | H111 | EN 573-3, EN 754 | Rod, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar | |
20.0 °C | 160.0 - 220.0 MPa Show Material materials with Zugfestigkeit of 160.0 - 220.0 MPa | H111 | EN 573-3, EN 755 | Rod, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar | ||
20.0 °C | 160.0 - 200.0 MPa Show Material materials with Zugfestigkeit of 160.0 - 200.0 MPa | H111 | EN 573-3, EN 485, EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Flat, Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar, Coil, Sheet, Plate, Strip | ||
20.0 °C | 160.0 - 200.0 MPa Show Material materials with Zugfestigkeit of 160.0 - 200.0 MPa | H111 | EN 573-3 | Flat | Transverse |
Thermisch
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20 °C | 2.3699999999999997e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3699999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |
100 °C | 2.3699999999999997e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3699999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | ||
100 °C | 0.000024 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 0.000024 1/K | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | 20-100°C | |
Max. Betriebstemperatur | 150.0 °C Show Material materials with Max. Betriebstemperatur of 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Schmelzpunkt | 610.0 - 650.0 °C Show Material materials with Schmelzpunkt of 610.0 - 650.0 °C | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | ||
Spezifische Wärmekapazität | 20.0 °C | 898.0 - 921.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 898.0 - 921.0 J/(kg·K) | H111 | EN 573-3 | Rod, Flat, Tube | |
20.0 °C | 898.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 898.0 J/(kg·K) | H111 | EN 573-3 | Rod, Flat, Tube | ||
20.0 °C | 921.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 921.0 J/(kg·K) | H111 | EN 573-3 | Rod, Flat, Tube | ||
Wärmeleitfähigkeit | 140.0 - 160.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 140.0 - 160.0 W/(m·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | ||
153 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 153 W/(m·K) | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |||
20.0 °C | 149.0 - 167.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 149.0 - 167.0 W/(m·K) | H111 | EN 573-3 | Rod, Flat, Tube | ||
20.0 °C | 149.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 149.0 W/(m·K) | H111 | EN 573-3 | Rod, Flat, Tube |
Elektrisch
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Elektrische Leitfähigkeit | 25000000.0 - 30000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 25000000.0 - 30000000.0 S/m | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |
20.0 °C | 26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 26000000.0 S/m | H111 | EN 573-3 | Rod, Flat, Tube | |
spezifischer Widerstand | 3.33e-08 - 4e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.33e-08 - 4e-08 Ω·m | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |
4.5e-08 Ω·m Show Material materials with spezifischer Widerstand of 4.5e-08 Ω·m | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | ||
20.0 °C | 4.6e-08 Ω·m Show Material materials with spezifischer Widerstand of 4.6e-08 Ω·m | H111 | EN 573-3 | Rod, Flat, Tube |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Andere | 0.05 - 0.15 % Show Material materials with Andere of 0.05 - 0.15 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip |
Chrom | 0.15 % Show Material materials with Chrom of 0.15 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar |
0.15 % Show Material materials with Chrom of 0.15 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |
Eisen | 0.5 % Show Material materials with Eisen of 0.5 % | H111 | EN 573-3 | Rod, Flat, Tube |
0.50 % Show Material materials with Eisen of 0.50 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Strip, Sheet, Plate, Wire, Tube, Welded Tube, Bar | |
0.5 % Show Material materials with Eisen of 0.5 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |
Kupfer | 0.15 % Show Material materials with Kupfer of 0.15 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar |
0.15 % Show Material materials with Kupfer of 0.15 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |
Magnesium | 1.7 - 2.4 % Show Material materials with Magnesium of 1.7 - 2.4 % | H111 | EN 573-3, EN 485, EN 754, EN 755, EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar, Coil, Sheet, Plate, Strip |
Mangan | 0.1 - 0.5 % Show Material materials with Mangan of 0.1 - 0.5 % | H111 | EN 573-3, EN 485, EN 754, EN 755, EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar, Coil, Sheet, Plate, Strip |
Silizium | 0.4 % Show Material materials with Silizium of 0.4 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar |
0.4 % Show Material materials with Silizium of 0.4 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |
Titan | 0.15 % Show Material materials with Titan of 0.15 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar |
0.15 % Show Material materials with Titan of 0.15 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip | |
Zink | 0.15 % Show Material materials with Zink of 0.15 % | H111 | EN 573-3, EN 485, EN 754, EN 755 | Rod, Flat, Tube, Strip, Sheet, Plate, Wire, Welded Tube, Bar |
0.15 % Show Material materials with Zink of 0.15 % | H111 | EN 573-1, EN 573-2, EN 573-3, EN 485-2 | Coil, Sheet, Plate, Strip |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: very good | |
| Application areas | Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Tubes: Industrial tubes, Pipes; Wind energy: Nacelle coverings, rotor hub, stairs; | |
| Brazing | hard brazing (with flux/ without flux): sufficient / poor, friction soldering: good, soft brazing with flux: sufficient | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Welding | Very Good | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / acceptable (H12) | |